Scoprite gli altri siti del gruppo Accedi Crea account

Messaggio di avvertimento

This form submits changes to your default configuration.

Download dei software

Per avvalervi nel modo migliore delle funzionalità di questo Sito Supporto, si consiglia di identificarvi.

Non esitate a creare il vostro conto se non l’avete già fatto. In qualsiasi momento, un clic su Il mio conto vi permetterà di modificare i ragguagli da voi forniti.

Il Gruppo Chauvin Arnoux si propone di fornirvi un efficace servizio on line; se desiderate inoltrarci le vostre osservazioni vi preghiamo di inviarci una mail a: support@Chauvin-Arnoux.com

Ricerca nell'area download


3 risultato/i :

Reading before install for Firmware update

Reading before install for Firmware update for CA 6131 / CA 6133 / MX 535

ca_6131_-_6133_-_mx_535_reading_before_install.pdf Update : 27/10/2021 Langue : FR - EN

Firmware for CA6131, CA6133 and MX535

Loader for firmware update of installation tester CA6131, CA6133 and MX535

CA6131 CA6133 and MX535   ->   v1.08

loader_ca6131-ca6133-mx535_v1.08.exe Update March 2024 - Version 1.08

METRIX ScopeNet

ScopiX I, II & III : Android application

ScopeNet lets you, from your tablet or Android phone :
- View waveforms live
- Perform measurements and analyses
- Take screenshots of the instrument
- Take control of METRIX oscilloscopes.
The purpose of this application is to monitor waveforms and measurements on a series of METRIX OX7000, OX6000B or MTX105X oscilloscopes. The application is designed to work with oscilloscopes with an Ethernet connection, whether they are already configured with DHCP or not.

To connect to an oscilloscope :
- the scope's Socket Server must be started
- the ‘ScopeAdmin’ port must be set to 5000
- the ‘ScopeNet’ port must be set to 5010

The application offers full control over the oscilloscope, such as viewing measurements and starting/stopping acquisitions.
The application does not control the oscilloscope's internal file system or SD card.
ScopeNet can be used to view all instruments and their compatibility on the network.
All installed functions and modes are available with ScopeNet.

Do not use ScopeNet and SX-METRO simultaneously.
This application can be installed on tablets from 7 inches or SmartPhones from 4.3 inches (reduced command set).

Compatible with the following devices:
METRIX brand oscilloscopes:
OX6000B Series oscilloscopes
OX7000 Series oscilloscopes
MTX105x Series oscilloscopes

updated : 06/14/2016

scopenet_application_android_apk_pour_scopix_i_ii_iii.zip ScopeNet Android application (apk) pour ScopiX I, II, III