Software downloads

The PEL Transfer software can be used to control the PEL51, PEL52, PEL102, PEL103, PEL104, PEL105, PEL106, PEL112, PEL113 and PEL115 power and energy loggers.

The PEL Transfer software is a tool for:

• Configuring the instruments,
• Downloading and viewing the data stored in the memory,
• Performing instantaneous acquisition operations,
• Displaying the data in the form of tables or graphs,
• Exporting the measurement data into (*.dvb files) or into a spreadsheet.

This evolution brings new features:
- Add czech language
- bugs fixed.

Compatible with Windows 7, 8, 8.1 , 10 and 11
Caution : DataView is not supplied with the PEL Transfer software

Here are the operating manual and quick-start guide for the PEL102, PEL 103 and PEL 104.

Firmware update

Compatible with the following devices:

METRIX model GX1030
 

Version: v1.01.01.33R8

Update date :

26/07/2024

EasyScope

Designed for METRIX DOX series oscilloscopes, EasyScope lets you :

Data processing (CSV file);
Import screenshots and configurations;
Send SCPI commands;
Communicate (to PC or printer)
Store recordings on USB key.
 

Compatible with the following devices:

DOX2025B
DOX2070B
DOX2100B
 

Version: v1.01.02.01.22

Update date :

26/07/2024

Firmware update
Compatible with the following devices:
- METRIX model DOX2070B
- METRIX model DOX2100B

Version: v6.01.01.25

To upgrade your camera's firmware, you need to download the file "ca1954_update_v01.08.tar_.zip", then extract it on your computer.

 

The file "CA1954_update_v01.08.tar.gz" is to be copied to the SD card of the camera without renaming it.

When the camera starts, the file is detected and an update request appears.

Make sure that the battery level is sufficient for the update (it takes appoximately 1 minute).

Firmware languages: French, English, Spanish, Italian, German, Chinese, Finnish, Swedish, Czech, Romanian, Polish, Portuguese, Dutch, Turkish, Korean, vietnamese

The PAT 3 Software - Power Analyser Transfer allows you to control your CA 8345 energy analyser.

To download this software, please click on the entilted file "x05077e00_pat3_1.5" and unzip it. After that, double click on the "Setup.exe" to install it.

The PAT 3 Software is a tool for :

• Configure your CA 8345,
• Download and view data in memory,
• Make instantaneous acquisitions,
• Display the data in tabular or graphical form,
• Export measurement data to DataView (*.dvb files) or to a spreadsheet.

Once the PAT 3 software is installed, you can download the samples below which are available to you. To do this, download the file and unzip it. Once you have done this, save the file to /DataView/DataFiles/Qualistar Class A.

Recordings samples are :

• Trends
• Alarms
• Configuration
• Inrush
• Monitoring
• Photos
• Transcients

Warning : this firmware version v1.13 is only compatible with v6.3 of the SX-Metro software

Manual firmware upgrade for the following oscilloscopes : OX 9062, OX 9102, OX 9104, OX 9304, OX 9302-BUS.

Please follow the recommendations in file : scopix_IV_firmware_installation_manual_procedure.pdf

To upgrade your oscilloscope, you need to download the "x04726n00_scopixiv_upgrade.zip"

MTT Machine Tester Link Software V1.4.6

The MTT software allows you to control the instrument and analyse the measurements made with your CA 6161 / CA 6163.

Main functions

The MTT software is a tool for:

Configuration of the instrument,
Downloading and viewing data in memory,
Generation of reports from the measurement data.

• Configuration of the instrument,
• Downloading and viewing data in memory,
• Generation of reports from the measurement data,
• Creating Auto Script(s)
• Creating Customized Visual Inspection(s)

The software is available in 6 languages: German, English, Spanish, French, Italian and Portuguese.

To install, extract the zip file into a single folder, then run the setup.

Minimum computer requirements:

Windows® 10 or later
4 GB RAM
10 GB of disk space
Microsoft Office® 2016 or later for viewing and editing docx reports.

Windows® and Office® are registered trademarks of Microsoft®.

SX-DMM v3.6 software
SX-DMM is a Microsoft Windows PC-compatible software package for a number of METRIX and CHAUVIN ARNOUX multimeters which allows :
- Acquire, record and process measurements from up to 4 instruments.
- Display data in the form of curves and tables.
- ... 
Compatible with the following devices:
METRIX multimeter:
MX5060 (USB link)
MTX3281 (optical link or Bluetooth link, depending on model)
MTX3282 (optical link or Bluetooth link, depending on model)
MTX3283 (optical link or Bluetooth link, depending on model)
MTX3281B (optical link or Bluetooth link, depending on model)
MTX3282B (optical link or Bluetooth link, depending on model)
MTX3283B (optical link or Bluetooth link, depending on model)
MTX3290 (optical link)
MTX3291 (optical link)
MTX3292 (optical link or Bluetooth link, depending on model)
MTX3293 (optical link or Bluetooth link, depending on model)
MX26 (optical link)
MX58HD (with RS232 option)
MD59HD (with RS232 option)
MX53C (with RS232 option)
MX54C (with RS232 option)
MX56C (with RS232 option)
MX556 (RS232 link)
MTX3250 (RS232 link)

METRIX brand HandScope :
OX5022 (in multimeter mode, optical/USB link)
OX5022B (multimeter mode, optical/USB link)
OX5042 (in multimeter mode, optical/USB link)
OX5042B (in multimeter mode, optical/USB link)

CHAUVIN ARNOUX multimeter:

CA 5292 (optical link or Bluetooth link, depending on model)
CA 5293 (optical link or Bluetooth link, depending on model)

CHAUVIN ARNOUX HandScope :
CA 922 (in multimeter mode, optical/USB link)
CA 942 (in multimeter mode, optical/USB link)

System :
Requires a PC compatible computer running one of the following operating systems:
- Microsoft Windows 11
- Microsoft Windows 10 32-bit (x86)
- Microsoft Windows 10 64-bit (x64)
- Microsoft Windows 8.1 32-bit (x86)
- Microsoft Windows 8.1 64-bit (x64)
- Microsoft Windows 8 32-bit (x86)
- Microsoft Windows 8 64-bit (x64)
- Microsoft Windows 7 32-bit (x86)

With a 1GHz processor or higher, 512MB RAM, 10GB free hard disk space, equipped with a serial or USB port.

Languages
Version in 5 languages: English, French, German, Italian and Spanish.

CP210x Universal Windows Driver v11.3.0                          USB drivers for Windows 10 / 11
CP210x_Windows_Drivers v6.7.3.zip                                   USB drivers for Windows 7/8/8.1

Firmware upgrade for the following oscilloscopes:

-MTX3x52 v1.x --> v1.07

-MTX3x52 v2.x --> v2.11

-MTX3x52 v3.x --> v3.05

-MTX3354 --> v3.05

-HandScope --> v1.05

-handscope B --->v2.01

- SCOPIX I: OX7042, OX7062, OX7102, OX7104 v1.0x --> v2.24
- SCOPIX II: OX7042, OX7062, OX7102, OX7104 v3.0x --> v3.24
- SCOPIX II: OX7202, OX7204 v4.0x --> v4.24
- SCOPIX III: v4.xx --> v4.24
- SCOPIX BUS: v5.xx --> v5.26

- OX6000 --> v1.09

- OX6000 II: OX6062, OX6202, OX6204 v2.x --> v2.24

UPDATE :

15/11/2024

NB: This upgrade does not concern the SCOPIX IV range.

Follow the recommendations in the file Instructions.pdf.

Installation:

To upgrade your oscilloscope, you must download the LoaderScope software.

The first time you execute the application, it will de-install the old version. You must then execute the program a second time to install the new version v3.2.

New firmware version 1.22 for FTV500

This new version is compatible with the FTV500 V1.20 and higher embedded firmware version.

FIRMWARE UPDATE

The update requires the presence of an inserted and mounted USB key (symbol present).

To proceed with the update, an "upgrade.bin" file corresponding to the updated version of the Firmware must be present on the key.

The PAT 3 Software - Power Analyser Transfer allows you to control your CA 8345 energy analyser.

To download this software, please click on the entilted file "x05077f00_pat3_1.6" and unzip it. After that, double click on the "Setup.exe" to install it.

The PAT 3 Software is a tool for :

• Configure your CA 8345,
• Download and view data in memory,
• Make instantaneous acquisitions,
• Display the data in tabular or graphical form,
• Export measurement data to DataView (*.dvb files) or to a spreadsheet.

Once the PAT 3 software is installed, you can download the samples below which are available to you. To do this, download the file and unzip it. Once you have done this, save the file to /DataView/DataFiles/Qualistar Class A.

Recordings samples are :

• Trends
• Alarms
• Configuration
• Inrush
• Monitoring
• Photos
• Transcients

You will find hereafter an important firmware update for CA 6161 / CA 6163 instruments.

The attached procedure (file readme.pdf) describes how to update the CA 6161 / CA 6163 instruments while using MTT software