Software downloads

Bilingual French-English version of the TestLink SE322 software for the C.A 834 sound level meter-recorder.
This software makes it very simple to:

• recover the data from the measuring instrument
• collect the data in real time from the instrument currently connected to the PC  

The GTT (Ground Tester Transfer) software can be used to control the C.A 6470, C.A 6471 and C.A 6472/74 earth testers.
GTT is a tool for:

• Configuring the instruments,
• Downloading and viewing the data stored in the memory,
• Performing instantaneous acquisition operations,
• Exporting the measurement data into DataView (*.dvb files) or into an Excel spreadsheet (*.csv or *.xls files).
  Caution: DataView is not supplied with this version of GTT

The MOT Micro-Ohmmeter Transfer software can be used to control the C.A 6240, C.A 6250, C.A 6255 and C.A 6292 micro-ohmmeters.

Main functions
The Micro-Ohmmeter Transfer software is a tool for:

• Configuring the instruments,
• Downloading and viewing the data stored in the memory,
• Exporting the measurement data into DataView or into a spreadsheet.

Caution: DataView is not supplied with the MOT software

Simple Logger II v1.19
For all the SimpleLogger II models

To download the firmware, click on the link below and refer to the "read-me first.txt" file included.

This firmware upgrade is compatible with all previous hardware versions.

The CAmReport software is equipped with a very simple user interface for:
> Analysis of the thermograms with the following tools:
    - Cursors (automatic display of the temperature at the point selected).
    - Thermal profile (automatic display of the Min/Max/Avg temperatures on the line).
    - A square or circle for area analysis
    - Polygons and polylines for more accurate analysis of certain areas in the thermogram.

Results tables quickly and automatically display all the information/analysis tools on the thermogram.

> Recovery of voice comments or related measurements 
> Automatic merging of the thermal and real images recorded simultaneously
> Automatic creation of reports for export in .pdf or .docx format.

Configuration required:

Windows 10/ Windows 11 : 
850 MB RAM for 32-bit 
2 G for 64-bit 
NET Framework 4.0 minimum 

System: Windows 10 and Windows 11

Language: Multilingual (15 languages including French, English, German, Spanish, Italian , Dutch, Polish, Romanian, Czech, simplified Chinese, Portuguese, Swedish, Finnish, Turkish, Korean)
  	

Version: v2.2.5 compatible with camera model C.A 1950 & CA1954.

CAmReport crashing after the Windows update

A cumulative update was rolled out on December 13th 2022. This update is responsible for systematically crashing CAmReport during report previews.

This issue was addressed in out-of-band updates released January 31, 2023

Link to Microsoft's procedure and access to corrective updates:

https://support.microsoft.com/en-us/topic/kb5022083-change-in-how-wpf-based-applications-render-xps-documents-a4ae4fa4-bc58-4c37-acdd-5eebc4e34556

This loader, new version v 1.09 allows you to update the firmware version of your ASYC IV.

Affected models

MTX3292B - MTX3293B -> firmware version  v 1.02

CA5292 - CA5293  -> firmware version  v 1.02

Note!

This Loader also allows you to change the language pack embedded in the multimeter - During installation you will be able to choose a language pack of two of the four possible languages (FR-GB, DE-GB, ES-GB or IT-GB).

File allowing you to update the Firmware of your GX1025-1050

To update your device, you have to follow the procedure findable page 61 in the User's Manual.

You can download the Firmware update of the FTV100 through the link below.

Embedded software update procedure

- Download the .bin file from our web site, then press and hold the MEM key and switch the instrument on by pressing the ON/OFF key. The instrument displays BOOT.

- Release the keys and the instrument displays COPY, indicating that it is ready to receive the new software.

- Connect the instrument to your PC using the USB cord provided.

- Copy the .bin file to the instrument as if were a USB key.

- When the copying is done, press the MEM key and the instrument displays LOAD, indicating that the software is being installed.

- When installation is done, the instrument displays PASS or FAIL according to whether or not the operation succeeded. If installation fails, download the software again and repeat the procedure.

- Then the instrument restarts normally.

CAUTION : After the firmware update, you will have to update the Bluetooth module.