Descargas de software

USB - Serial adapter ((USB-RS232)

• Driver for HX0055 compatible with Windows 7
• Driver for HX0055B compatible with Windows 7 / 8.1 /10 /11

Installation

To upgrade your camera, you need to download the CameraLoader_Installer software.
Once installation has finished, run the program, select your language in the top right-hand corner and click on "Start".

Then, you have to follow the instructions inside the loader.

Loader language: French, English

Firmware language: French, English, Spanish, Italian, German, Chinese, Finnish, Swedish, Czech, Romanian, Polish, Portuguese, Dutch, Turkish, Korean

Compatibility: Windows 8, Windows 10, Windows 11

Please follow the recommendations described in the file: MAJ-Upgrade Firmware C.A 6165_FR_GB.

The MTLink software allows you to control the C.A 6165 multi-function electrical equipment tester.

Funcions:
MTLink software is a tool for:

• Instrument configuration,
• Automatic scripts development,
• Downloading and viewing data in memory,
• Creating reports from this measurement data.

The software is available in 6 languages: German, English, Spanish, French, Italian and Portuguese.

For installation, extract the zip file into a single folder, then run the setup

Download the latest version of the firmware v1.09 for the CA 6422 and CA 6424 and benefit from all the latest improvements.

Here is the procedure for connecting the device to the PC :


Please find enclosed the new firmware.

- Unzip it,

- Connect the instrument to the PC,

- Run the .exe file,

- A pop-up window will open,

- The first line will show the instrument, click on the "program" icon...

Please note: the CA 6422 and CA 6424 are non-communicating products, so the instruction "connect the instrument to the PC" is a shortcut and requires a tool not supplied as standard with the product.

Loader for firmware update of installation tester CA6131, CA6133 and MX535

CA6131 CA6133 and MX535   ->   v1.20

SCPI order booklet for the CA 8345 so that you can integrate your product in a system. It will enable your system's software to control your CA 8345 remotely.

This PC software makes it very simple to :

- Recover the data from the CA 1310 sonometer.

- Collect the data in the real time from the instrument currently connected ton the PC.

System : Windows 7, Windows 8, Windows 10 & Windows 11

Languages : French, English, German, Spanish, Italian, Swedish, Finnish, Danish.

Below are the links to download the latest versions of CA Link, CE Link and Machine Link.  

ScopeNet lets you, from your tablet or Android phone :
- View waveforms live
- Perform measurements and analyses
- Take screenshots of the instrument
- Take control of METRIX oscilloscopes.
The purpose of this application is to monitor waveforms and measurements on a series of METRIX OX7000, OX6000B or MTX105X oscilloscopes. The application is designed to work with oscilloscopes with an Ethernet connection, whether they are already configured with DHCP or not.

To connect to an oscilloscope :
- the scope's Socket Server must be started
- the ‘ScopeAdmin’ port must be set to 5000
- the ‘ScopeNet’ port must be set to 5010

The application offers full control over the oscilloscope, such as viewing measurements and starting/stopping acquisitions.
The application does not control the oscilloscope's internal file system or SD card.
ScopeNet can be used to view all instruments and their compatibility on the network.
All installed functions and modes are available with ScopeNet.

Do not use ScopeNet and SX-METRO simultaneously.
This application can be installed on tablets from 7 inches or SmartPhones from 4.3 inches (reduced command set).

Compatible with the following devices:
METRIX brand oscilloscopes:
OX6000B Series oscilloscopes
OX7000 Series oscilloscopes
MTX105x Series oscilloscopes

updated : 06/14/2016

The PEL Transfer software can be used to control the PEL51, PEL52, PEL102, PEL103, PEL104, PEL105, PEL106, PEL112, PEL113 and PEL115 power and energy loggers.

The PEL Transfer software is a tool for:

• Configuring the instruments,
• Downloading and viewing the data stored in the memory,
• Performing instantaneous acquisition operations,
• Displaying the data in the form of tables or graphs,
• Exporting the measurement data into (*.dvb files) or into a spreadsheet.

This evolution brings new features:
- Add czech language
- bugs fixed.

Compatible with Windows 7, 8, 8.1 , 10 and 11
Caution : DataView is not supplied with the PEL Transfer software

Firmware update

Compatible with the following devices:

METRIX model GX1030
 

Version: v1.01.01.33R8

Update date :

26/07/2024

EasyScope

Designed for METRIX DOX series oscilloscopes, EasyScope lets you :

Data processing (CSV file);
Import screenshots and configurations;
Send SCPI commands;
Communicate (to PC or printer)
Store recordings on USB key.
 

Compatible with the following devices:

DOX2025B
DOX2070B
DOX2100B
 

Version: v1.01.02.01.22

Update date :

26/07/2024

Firmware update
Compatible with the following devices:
- METRIX model DOX2070B
- METRIX model DOX2100B

Version: v6.01.01.25

To upgrade your camera's firmware, you need to download the file "ca1954_update_v01.08.tar_.zip", then extract it on your computer.

 

The file "CA1954_update_v01.08.tar.gz" is to be copied to the SD card of the camera without renaming it.

When the camera starts, the file is detected and an update request appears.

Make sure that the battery level is sufficient for the update (it takes appoximately 1 minute).

Firmware languages: French, English, Spanish, Italian, German, Chinese, Finnish, Swedish, Czech, Romanian, Polish, Portuguese, Dutch, Turkish, Korean, vietnamese

Warning : this firmware version v1.13 is only compatible with v6.3 of the SX-Metro software

Manual firmware upgrade for the following oscilloscopes : OX 9062, OX 9102, OX 9104, OX 9304, OX 9302-BUS.

Please follow the recommendations in file : scopix_IV_firmware_installation_manual_procedure.pdf

To upgrade your oscilloscope, you need to download the "x04726n00_scopixiv_upgrade.zip"

MTT Machine Tester Transfer Software v1.4.6

The MTT software allows you to control the instrument and analyse the measurements made with your CA 6161 / CA 6163.

Main functions

The MTT software is a tool for:

Configuration of the instrument,
Downloading and viewing data in memory,
Generation of reports from the measurement data.

• Configuration of the instrument,
• Downloading and viewing data in memory,
• Generation of reports from the measurement data,
• Creating Auto Script(s)
• Creating Customized Visual Inspection(s)

The software is available in 6 languages: German, English, Spanish, French, Italian and Portuguese.

To install, extract the zip file into a single folder, then run the setup.

Minimum computer requirements:

Windows® 10 or later
4 GB RAM
10 GB of disk space
Microsoft Office® 2016 or later for viewing and editing docx reports.

Windows® and Office® are registered trademarks of Microsoft®.

SX-DMM v3.6 software
SX-DMM is a Microsoft Windows PC-compatible software package for a number of METRIX and CHAUVIN ARNOUX multimeters which allows :
- Acquire, record and process measurements from up to 4 instruments.
- Display data in the form of curves and tables.
- ... 
Compatible with the following devices:
METRIX multimeter:
MX5060 (USB link)
MTX3281 (optical link or Bluetooth link, depending on model)
MTX3282 (optical link or Bluetooth link, depending on model)
MTX3283 (optical link or Bluetooth link, depending on model)
MTX3281B (optical link or Bluetooth link, depending on model)
MTX3282B (optical link or Bluetooth link, depending on model)
MTX3283B (optical link or Bluetooth link, depending on model)
MTX3290 (optical link)
MTX3291 (optical link)
MTX3292 (optical link or Bluetooth link, depending on model)
MTX3293 (optical link or Bluetooth link, depending on model)
MX26 (optical link)
MX58HD (with RS232 option)
MD59HD (with RS232 option)
MX53C (with RS232 option)
MX54C (with RS232 option)
MX56C (with RS232 option)
MX556 (RS232 link)
MTX3250 (RS232 link)

METRIX brand HandScope :
OX5022 (in multimeter mode, optical/USB link)
OX5022B (multimeter mode, optical/USB link)
OX5042 (in multimeter mode, optical/USB link)
OX5042B (in multimeter mode, optical/USB link)

CHAUVIN ARNOUX multimeter:

CA 5292 (optical link or Bluetooth link, depending on model)
CA 5293 (optical link or Bluetooth link, depending on model)

CHAUVIN ARNOUX HandScope :
CA 922 (in multimeter mode, optical/USB link)
CA 942 (in multimeter mode, optical/USB link)

System :
Requires a PC compatible computer running one of the following operating systems:
- Microsoft Windows 11
- Microsoft Windows 10 32-bit (x86)
- Microsoft Windows 10 64-bit (x64)
- Microsoft Windows 8.1 32-bit (x86)
- Microsoft Windows 8.1 64-bit (x64)
- Microsoft Windows 8 32-bit (x86)
- Microsoft Windows 8 64-bit (x64)
- Microsoft Windows 7 32-bit (x86)

With a 1GHz processor or higher, 512MB RAM, 10GB free hard disk space, equipped with a serial or USB port.

Languages
Version in 5 languages: English, French, German, Italian and Spanish.

CP210x Universal Windows Driver v11.3.0                          USB drivers for Windows 10 / 11
CP210x_Windows_Drivers v6.7.3.zip                                   USB drivers for Windows 7/8/8.1