Descargas de software

EASYWAVE software is designed in order to allow you to:

- retrieve the curves from the oscilloscope mode

- edit the waveforms using drawing tools

- transfer or import toward the ARBitary function (4 memory locations)

- consult from the library of files (sine, square, ramp, pulse, noise, exponential...) 

The GTT (Ground Tester Transfer) software can be used to control the C.A 6470, C.A 6471 and C.A 6472/74 earth testers.
GTT is a tool for:

• Configuring the instruments,
• Downloading and viewing the data stored in the memory,
• Performing instantaneous acquisition operations,
• Exporting the measurement data into DataView (*.dvb files) or into an Excel spreadsheet (*.csv or *.xls files).
  Caution: DataView is not supplied with this version of GTT

The DTR Transfer software can be used to control the DTR8510 and DTR8511 ratiometer.

The DTR Transfer software is a tool for :

• Configuring the instruments,
• Downloading and viewing the data stored in the memory,
• Exporting the data into Dataview

Caution : DataView is not supplied with the software DTR

GTC is a tool for:

- Configuring the instruments,
- Downloading and viewing the data stored in the memory and saving them (creation of a *.icp file)
- Perform instantaneous acquisition operations,
- Exporting the measurement data into DATAVIEW (*.dvb files) or an Excel spreadsheet (*.csv or *.xls files)

Caution: Dataview is not supplied with this version of GTC

Megohmmeter Transfer is a tool for:

- Configuring the instruments,
- Downloading and viewing the data stored in the memory and then saving them (creation of a *.icp file)
- Performing instantaneous acquisition operations,
- Exporting the measurement data into DATAVIEW (*.dvb) files or an Excel spreadsheet (*.csv or *.xls files)

Caution: Dataview is not supplied with this version of MEGOHMMETER Transfer 

The SL II Simple Logger II software allows you to control the Simple Logger II Loggers:

CL601, L101, L102, L111, L642, L261, L481, L562, AL834, ML912, ML914, L702, L404, L322, L432.

Simple Logger II software functions:

• Configure the devices,
• Download and display the data in memory,
• Make acquisitions in real time,
• Diplay recorded data on tables and / or graphs,
• Export data measurement to DataView (*.dvb files) or to a spreadsheet (Excel).  

Attention : DataView is not provided with SL II software

DataView v3.62.0016

Compatible instruments :

• PEL 102, PEL 103, PEL 104, PEL 105, PEL 106 power and energy loggers;
• F407 and F607 power and harmonics clamps;
• C.A 8220 and 8230 single-phase power analysers;
• Qualistar C.A 8331,8332, 8333,8334, 8335, 8435, 8436, 8336 and 8345.
• C.A 6526, 6532, 6534, 6543, 6547, 6549, 6550 and 6555 megohmmeters;
• C.A 6240, 6250, 6255 and 6292 micro-ohmmeters;
• C.A 6470N, 6471 and 6472 earth testers;
• C.A 6417 earth clamp;
• DTR 8510 ratiometer for transformers;
• Simple Logger II and L452;
• C.A 1110, 1227, 1246, 1821, 1822, 1510,1823, 10101, 10141 physical measurement devices;
• C.A 6116, 6116N and 6117 electrical installation testers

Languages

DataView is available in the following languages: German, English, Chinese, Spanish, French, Italian, Dutch, Polish, Swedish, Czech and Turkish

TACHOGRAPH software can be used for management of the data contained in the C.A 1727.

It has the following functionalities:

-          retrieval and display of the measurements recorded by the instrument,

-          the counting of the integral and the stemming of a curve (position and acceleration),

-          the filtration of a recording by moving average,

-          the exporting of the different curves acquired into EXCEL.

Systèms : Windows XP, Windows Seven, Windows 8 & Windows 10

Language : 5 languages (French, English, German, Spanish, Italian)

Version : v2.0 compatible with C.A 1727

Designed for Metrix and Chauvin-Arnoux digital oscilloscopes, SX-METRO can be used to:

• acquire, record and process the curves from the oscilloscope;
• import screenshots;
• save or restore configurations ;
• view the curves in real time;
• communicate with the oscilloscope via an RS232 serial link, USB or TCP/IP network;
• transfer the data into Excel or into a text file;
• perform mathematical processing such as FFT of the signal viewed (windowing, enlargement of the result, Y scale of the FFT in Volt or dB, measurements by markers).

Oscilloscopes

- OX5022, OX5042, CA 922, CA 942
- MTX162, MTX1052, MTX1054,
- MTX3252, MTX3352,
- MTX3354,
- OX7042, OX7062, OX7102, OX7104, OX7202, OX7204,
- OX6062, OX6152, OX6202, 
- OX2000, OX5100,
- OX8100, OX8050, OX8040, OX8062, OX8042,
- OX8620, OX8627, OX8020, OX8027, OX8032, OX8022.
- OXI6204
- OX9062, OX9102, OX9104, OX9302 BUS et OX9304 (with firmware version v1.10 or higher)

Languages
Version in 5 languages: English, German, Spanish, French and Italian. 

To download the software SX Metro v6.3, you need to download the .Zip file, extract all the files and then run the Setup.exe file.

With Datalogger software for DL53, you will be able to :

Setup the instruments,

Download and display the trends,

Export data into Excel

Compatible with Windows 7, 8, 8.1, 10 and 11

Software Machine Link 2.1 for CA 6121

With the PEL100 Android app, you can connect your Android device to a PEL instrument, using Bluetooth or Wi-Fi communication protocol; make a few settings, and get real time measurements.

The PEL100 Android app provides a fast, convenient and portable solution for working with a PEL instrument. And it allows you to easily connect to PEL instruments that may be placed in hard-to-reach locations.

Developments in this new version V 1.8.25 :

• Compatibility with Android 12
• Some bug fixes
• Real time measurements of engine parameters.

Concerning this last point, thanks to work based on a physical and statistical model, Chauvin Arnoux has developed a software sensor capable of providing the motor's electrical parameters.

We thus provide the motor's speed of rotation, efficiency and instantaneous torque.

An application note on this new function exists and is available on our website.

The PEL 100 application is free and remains available on GooglePlay in :

English, Czech, Danish, Dutch, Finnish, French, German, Italian, Norwegian, Polish, Russian, Chinese (Simplified), Slovak, Spanish and Swedish.

It is compatible with Android versions >= v6.0

ICT is a tool for:

With the software Data Logger Transfer, you will be able to :

• Setup the instruments,
• Download and display the trends,
• Display real time values,
• Display data in curves or table,
• Export automatic reports in Word (.docx format), 
• Export data into Dataview (.dvb files) or into Excel

Compatible with Windows 7, 8, 8.1 and 10.

Attention: DataView is not provided with the software Data Logger Transfer

Installation

To upgrade your camera, you need to download the CameraLoader_Installer software.
Once installation has finished, run the program, select your language in the top right-hand corner and click on "Start".

Then, you have to follow the instructions inside the loader.

Loader language: French, English

Firmware language: French, English, Spanish, Italian, German, Chinese, Finnish, Swedish, Czech, Romanian, Polish, Portuguese, Dutch, Turkish, Korean

Compatibility: Windows 8, Windows 10, Windows 11

Please follow the recommendations described in the file: MAJ-Upgrade Firmware C.A 6165_FR_GB.

The MTLink software allows you to control the C.A 6165 multi-function electrical equipment tester.

Funcions:
MTLink software is a tool for:

• Instrument configuration,
• Automatic scripts development,
• Downloading and viewing data in memory,
• Creating reports from this measurement data.

The software is available in 6 languages: German, English, Spanish, French, Italian and Portuguese.

For installation, extract the zip file into a single folder, then run the setup

SCPI order booklet for the CA 8345 so that you can integrate your product in a system. It will enable your system's software to control your CA 8345 remotely.

This PC software makes it very simple to :

- Recover the data from the CA 1310 sonometer.

- Collect the data in the real time from the instrument currently connected ton the PC.

System : Windows 7, Windows 8, Windows 10 & Windows 11

Languages : French, English, German, Spanish, Italian, Swedish, Finnish, Danish.