Softwares herunterladen

This self-extracting archive contains 6 files. It can be used to install version 2.00.2/1.09.5.

Pack1 installs the languages: DE-GB-ES-FR-IT
(Deutsch, English, Español, Français, Italiano).

Pack3 installs the languages: PL-GB-CS-DE-SV
(Polski, English, Cestina, Deutsch, Svenska).

CAUTION: If you use the ICT or DataView PC software with your C.A 6116, please also upgrade those products (versions concerned: ICT version 1.02.0011 and DataView 3.06.)
These software products are available for download from our Support site in the "Free Software" section.

This software can be used to recover the measurements stored in a C.A 6454 or C.A 6456 or C.A 6030 electrical installation tester and export them into EXCEL.

Very easy to install and use; no programming necessary.

• The statistics are displayed on-screen: Maximum, Minimum, Average, Date and Time
• Display of the recorded values
• Possibility of zooming with automatic updating of the statistics
• Annotation of texts
• Automatic display of the value pointed to by the cursor
  Data export to spreadsheet or database
• Printing of curves or lists (tabulated) of the values
• Copy-Paste the graphs into other applications
• Programmable scales and units for all DC loggers
• Automatic selection of the Simple Logger model 

Simple Logger  

Configuration required:
System: Windows® 98, Me, NT, 2000 or XP.
Hardware: PC with 486 processor or higher, 8 MB free on hard disk for the application aqnd 400 KB per recording. RS232C serial port.

Version v6.20 is ideal for all the logger models EXCEPT FOR THE SIMPLE LOGGER L215.
Version v6.01 proposed below is specific to the SimpleLogger L215 AEMC model. 

Main functions
- Recovery of the measurements taken with an F27 clamp.
- Data acquisition by sampling from 1 min to 60 min.
- Digital and graphical display of the data.
- Possibility of printing out the different representations.
- Data export into EXCEL. 

System
Windows 98, Windows NT, Windows 2000 , Windows Me , Windows XP or Windows Vista.

Hardware
PC     

SX-ASYC2C is the software made for the calibration of the multimeters MX53/54/55/56 and MX58/59HD+MX554/556.

Designed for the DOX Series of METRIX oscilloscopes, EasyScope can be used to:

• process the data (CSV file);
• import screenshots and configurations;
• send SCPI commands;
• communicate via USB (with a PC or printer) and Ethernet (DOX3000);
• store the recordings on a USB key.

Compatibility Window XP(32 bits), Windows Vista(32 bits/64 bits), Windows 7(32 bits/64 bits) and Windows 8

Your oscilloscopes
MTX162, MTX112. 

System

• Windows XP/Vista/7. 
• PC with Pentium IV processor or higher, 512 MB RAM, 10 GB HD equipped with a USB port and network output.
  
  Languages
  Version in 5 languages: German, English, Spanish, French and Italian.

The Didascopein@box software is installed automatically when you install Scopein@box LE.

Delivered with the C.A 43, the EMIGRAPH software has been designed to optimize the capabilities of this field meter in terms of acquisition, viewing and display.
Acquisition. For dynamic tests, EMIGRAPH acquires the measurements from the C.A 43 at a rate of one point every 2 seconds. This allows you to record spot measurements and the trace in real time.

Viewing. EMIGRAPH manages the transfer and display of the points (min, max and average) stored by the C.A 43: this means it is possible to search quickly on the screen for random disturbances. Analysis of the details is facilitated by zooming.

Display. For EMC tests in an anechoic chamber or cell, when the C.A 43's display is not visible, Emigraph allows you to present the field meter display on your PC in full-screen mode.

System

• Windows XP/Vista/7/8/8.1/10.
• PC with 1 GHz processor or higher, 512 MB RAM, 4 GB HD equipped with a serial or USB port (with serial adapter).
  Languages Version in 5 languages: English, German, Spanish, French and Italian.  

Bilingual French-English version of the TestLink SE322 software for the C.A 834 sound level meter-recorder.
This software makes it very simple to:

• recover the data from the measuring instrument
• collect the data in real time from the instrument currently connected to the PC  

Firmware zum Prüfen von elektrischen Betriebsmitteln nach DIN EN 50678 (VDE 0701) und DIN EN 50699 (VDE 0702) sowie von elektromedizinischen Geräten nach DIN EN 62353 (VDE 0751-1). Optional ermöglicht diese Firmware ebenfalls die Prüfung von Lichtbogenschweißgeräten nach DIN EN 60974-4 (VDE 0544-4).

ACHTUNG: Wenn Sie die PC-Software C.A Appliance Standard mit Ihrem Gerät verwenden, aktualisieren Sie bitte auch diese Software.

Mit der einfach zu benutzenden Software C.A Appliance Standard können alle Messwerte und Aufzeichnungen über die USB-Schnittstelle (Kabel oder Stick) an einen PC übertragen und verarbeitet werden. Die Prüfprotokolle werden unter Microsoft Word™ erstellt. Die Prüfdatenverwaltung geschieht mit Microsoft Excel™. Um Neueingaben bei Wiederholungsprüfungen zu vermeiden besteht die Möglichkeit die Stammdaten (Name, Identnummer, Gerät, Messprofil…) in den Gerätetester zu übertragen.

Kompatibel mit :

Gerätetester C.A 6108

Sprache :
Deutsch