Softwares herunterladen

Designed for the METRIX GX1025, GX1050 & GX1030 generators, SX-GENE can be bused to:
control the generator and record or restore configurations;
load the arbitrary signals generated from a graphical curve editor or mathematical model editor or signals from curves recovered from an oscilloscope (TRC files).
  	
Configuration
System
Windows XP/Vista/7/8.
PC with 1 GHz processor or higher, 512 MB RAM, 100 GB HD.

Languages
Version in 5 languages: English, German, Spanish, French and Italian.

To check: "Utility" key, "1/2" menu and then "EditInfo".
If an upgrade is necessary, download the file "Firmware v1.01.01.27" onto a USB key, insert the USB key in the front panel of the generator and start the upgrade.

"Utility" key, "1/2" menu and then "Update":
- Select "USB Device (O:)" with the up and down arrows,
- Select the file with the "Browser/File" menu and the up and down arrows,
- Choose the "Recall" menu
- Restart the generator when the following message is displayed:"Update is finished. Restart!".  

ICT is a tool for:

With the software Data Logger Transfer, you will be able to :

• Setup the instruments,
• Download and display the trends,
• Display real time values,
• Display data in curves or table,
• Export automatic reports in Word (.docx format), 
• Export data into Dataview (.dvb files) or into Excel

Compatible with Windows 7, 8, 8.1 and 10.

Attention: DataView is not provided with the software Data Logger Transfer

Drivers required for communication between CA 10101E or CA 10141E devices and Regressi or Graph2D PC software running under Windows 7 or 8.

These drivers are not required under Windows 10 or 11.

Installation

To upgrade your camera's firmware, you need to download the file "ca1954_update_v01.07.tar_.zip", then extract it on your computer.

 

The file "CA1954_update_v01.07.tar.gz" is to be copied to the SD card of the camera without renaming it.

When the camera starts, the file is detected and an update request appears.

Make sure that the battery level is sufficient for the update (it takes appoximately 1 minute).

Firmware languages: French, English, Spanish, Italian, German, Chinese, Finnish, Swedish, Czech, Romanian, Polish, Portuguese, Dutch, Turkish, Korean, vietnamese

Safety datasheets buffers and maintenance solutions

français - english - deutsch - español - italiano

  -------------------------------------------------------------------------------------------

  -------------------------------------------------------------------------------------------

français

Tampon pH 1.68

Tampon pH 4 concentré

Tampon pH 4.01

Tampon pH 4.005 COFRAC

Tampon pH 7 concentré

Tampon pH 6.865 COFRAC

Tampon pH 7.00

Tampon pH 9 concentré

Tampon pH 9.180 COFRAC

Tampon pH 9.18

Tampon pH 10.01

Tampon conductivité 12.85mS/cm

Tampon conductivité concentré 12.88mS/cm KCl 1M

Tampon conductivité 147µS/cm

Tampon conductivité 1408µS/cm

Tampon concentré Redox 146 mV (Solution Michaelis)

Tampon Redox 220 mV

Tampon Redox 468 mV

Solution de remplissage pour électrode KCl 1 mol/L

Solution de remplissage pour électrode KCl 3 mol/L

Solution d'entretien Pepsine/HCl

 -------------------------------------------------------------------------------------------

english

Buffer pH 1.68

Concentrated buffer pH 4

Buffer pH 4.01

Buffer pH 4.005 Certified reference material

Concentrated buffer pH 7

Buffer pH 6.865 Certified reference material

Buffer pH 7.00

Concentrated buffer pH 9

Buffer pH 9.180 Certified reference material

Buffer pH 9.18

Buffer pH 10.01

Conductivity standard 12.85mS/cm

Concentrated conductivity standard 12.88mS/cm KCl1M

Conductivity standard 147µS/cm

Conductivity standard 1408µS/cm

Concentrated ORP buffer 146 mV (Michaelis Solution)

ORP buffer 220 mV

ORP buffer 468 mV

Electrode filling solution KCl 1 mol/L

Electrode filling solution KCl 3 mol/L

Pepsin-HCl Maintenance Solution

  -------------------------------------------------------------------------------------------

deutsch

Standard Pufferlösung pH 1.68

Konzentrierte Pufferlösung pH 4

Standard Pufferlösung pH 4.01

Standard Pufferlösung pH 4.005 Zertifiziertes Referenzmaterial

Konzentrierte Pufferlösung pH 7

Standard Pufferlösung pH 6.865 Zertifiziertes Referenzmaterial

Standard Pufferlösung pH 7.00

Konzentrierte Pufferlösung pH 9

Standard Pufferlösung pH 9.180 Zertifiziertes Referenzmaterial

Standard Pufferlösung pH 9.18

Standard Pufferlösung pH 10.01

Leitfähigkeitsstandard 12.85mS/cm

Konzentrierter Leitfähigkeitsstandard 12.88mS/cm KCl 1M

Leitfähigkeitsstandard 147µS/cm

Leitfähigkeitsstandard 1408µS/cm

Michaelis-Redox-Pufferlösung 146 mV

Redox-Puffer 220 mV

Redox-Puffer 468 mV

Fülllösung für Elektrode KCl 1 mol/L

Fülllösung für Elektrode KCl 3 mol/L

Pepsin/HCl-Erhaltungslösung

  -------------------------------------------------------------------------------------------

español

Tampón pH 1.68

Tampón pH 4 concentrado

Tampón pH 4.01

Buffer pH 4.005 material de referencia certificado

Tampón pH 7 concentrado

Buffer pH 6.865 material de referencia certificado

Tampón pH 7.00

Tampón pH 9 concentrado

Buffer pH 9.180 material de referencia certificado

Tampón pH 9.18

Tampón pH 10.01

Solución patrón Conductividad 12.85mS/cm

Solución patrón Conductividad concentrad 12.88mS/cm KCl 1M

Solución patrón Conductividad 147µS/cm

Solución patrón Conductividad 1408µS/cm

Tampón Redox 146 mV concentrado

Tampón Redox 220 mV

Tampón Redox 468 mV

Solución de relleno para electrodo KCl 1 mol/L

Solución de relleno para electrodo KCl 3 mol/L

Solución de mantenimiento Pepsina/HCl

  -------------------------------------------------------------------------------------------

italiano

Tampone pH 1.68

Tampone pH 4 concentrato

Tampone pH 4.01

Tampone pH 4.005 materiale di riferimento certificatol

Tampone pH 7 concentrato

Tampone pH 6.865 materiale di riferimento certificato

Tampone pH 7.00

Tampone pH 9 concentrato

Tampone pH 9.180 materiale di riferimento certificato

Tampone pH 9.18

Tampone pH 10.01

Soluzione campione conducibilità 12.85mS/cm

Soluzione campione conducibilità concentrata 12,88 mS/cm KCl 1M

Soluzione campione conducibilità 147µS/cm

Soluzione campione conducibilità 1408µS/cm

Tampone Redox 146 mV concentrato (Solution Michaelis)

Tampone Redox 220 mV

Tampone Redox 468 mV

Soluzione di riempimento per elettrodi KCl 1 mol/L

Soluzione di riempimento per elettrodi KCl 3 mol/L

Soluzione di mantenimento di pepsina/HCl

USB - Serial adapter ((USB-RS232)

• Driver for HX0055 compatible with Windows 7
• Driver for HX0055B compatible with Windows 7 / 8.1 /10 /11

Installation

To upgrade your camera, you need to download the CameraLoader_Installer software.
Once installation has finished, run the program, select your language in the top right-hand corner and click on "Start".

Then, you have to follow the instructions inside the loader.

Loader language: French, English

Firmware language: French, English, Spanish, Italian, German, Chinese, Finnish, Swedish, Czech, Romanian, Polish, Portuguese, Dutch, Turkish, Korean

Compatibility: Windows 8, Windows 10, Windows 11

Please follow the recommendations described in the file: MAJ-Upgrade Firmware C.A 6165_FR_GB.

The MTLink software allows you to control the C.A 6165 multi-function electrical equipment tester.

Funcions:
MTLink software is a tool for:

• Instrument configuration,
• Automatic scripts development,
• Downloading and viewing data in memory,
• Creating reports from this measurement data.

The software is available in 6 languages: German, English, Spanish, French, Italian and Portuguese.

For installation, extract the zip file into a single folder, then run the setup

Download the latest version of the firmware v1.09 for the CA 6422 and CA 6424 and benefit from all the latest improvements.

Here is the procedure for connecting the device to the PC :


Please find enclosed the new firmware.

- Unzip it,

- Connect the instrument to the PC,

- Run the .exe file,

- A pop-up window will open,

- The first line will show the instrument, click on the "program" icon...

Please note: the CA 6422 and CA 6424 are non-communicating products, so the instruction "connect the instrument to the PC" is a shortcut and requires a tool not supplied as standard with the product.

You will find hereafter an important firmware update for CA 6161 / CA 6163 instruments.

The attached procedure (file readme.pdf) describes how to update the CA 6161 / CA 6163 instruments while using MTT software 

Loader for firmware update of installation tester CA6131, CA6133 and MX535

CA6131 CA6133 and MX535   ->   v1.08

The PAT 3 Software - Power Analyser Transfer allows you to control your CA 8345 energy analyser.

To download this software, please click on the entilted file "X05077D00_PAT3_1.04" and unzip it. After that, double click on the "Setup.exe" to install it.

The PAT 3 Software is a tool for :

• Configure your CA 8345,
• Download and view data in memory,
• Make instantaneous acquisitions,
• Display the data in tabular or graphical form,
• Export measurement data to DataView (*.dvb files) or to a spreadsheet.

Once the PAT 3 software is installed, you can download the samples below which are available to you. To do this, download the file and unzip it. Once you have done this, save the file to /DataView/DataFiles/Qualistar Class A.

Recordings samples are :

• Trends
• Alarms
• Configuration
• Inrush
• Monitoring
• Photos
• Transcients

SCPI order booklet for the CA 8345 so that you can integrate your product in a system. It will enable your system's software to control your CA 8345 remotely.

This PC software makes it very simple to :

- Recover the data from the CA 1310 sonometer.

- Collect the data in the real time from the instrument currently connected ton the PC.

System : Windows 7, Windows 8, Windows 10 & Windows 11

Languages : French, English, German, Spanish, Italian, Swedish, Finnish, Danish.

Below are the links to download the latest versions of CA Link, CE Link and Machine Link.  

ScopeNet lets you, from your tablet or Android phone :
- View waveforms live
- Perform measurements and analyses
- Take screenshots of the instrument
- Take control of METRIX oscilloscopes.
The purpose of this application is to monitor waveforms and measurements on a series of METRIX OX7000, OX6000B or MTX105X oscilloscopes. The application is designed to work with oscilloscopes with an Ethernet connection, whether they are already configured with DHCP or not.

To connect to an oscilloscope :
- the scope's Socket Server must be started
- the ‘ScopeAdmin’ port must be set to 5000
- the ‘ScopeNet’ port must be set to 5010

The application offers full control over the oscilloscope, such as viewing measurements and starting/stopping acquisitions.
The application does not control the oscilloscope's internal file system or SD card.
ScopeNet can be used to view all instruments and their compatibility on the network.
All installed functions and modes are available with ScopeNet.

Do not use ScopeNet and SX-METRO simultaneously.
This application can be installed on tablets from 7 inches or SmartPhones from 4.3 inches (reduced command set).

Compatible with the following devices:
METRIX brand oscilloscopes:
OX6000B Series oscilloscopes
OX7000 Series oscilloscopes
MTX105x Series oscilloscopes

updated : 06/14/2016

You will find hereafter an important firmware update for CA 6161 / CA 6163 instruments.

The attached procedure (file readme.pdf) describes how to update the CA 6161 / CA 6163 instruments while using MTT software 

The PEL Transfer software can be used to control the PEL51, PEL52, PEL102, PEL103, PEL104, PEL105, PEL106, PEL112, PEL113 and PEL115 power and energy loggers.

The PEL Transfer software is a tool for:

• Configuring the instruments,
• Downloading and viewing the data stored in the memory,
• Performing instantaneous acquisition operations,
• Displaying the data in the form of tables or graphs,
• Exporting the measurement data into (*.dvb files) or into a spreadsheet.

This evolution brings new features:
- Add czech language
- bugs fixed.

Compatible with Windows 7, 8, 8.1 , 10 and 11
Caution : DataView is not supplied with the PEL Transfer software