Descargas de software

This self-extracting archive contains 6 files. It can be used to install version 2.00.2/1.09.5.

Pack1 installs the languages: DE-GB-ES-FR-IT
(Deutsch, English, Español, Français, Italiano).

Pack3 installs the languages: PL-GB-CS-DE-SV
(Polski, English, Cestina, Deutsch, Svenska).

CAUTION: If you use the ICT or DataView PC software with your C.A 6116, please also upgrade those products (versions concerned: ICT version 1.02.0011 and DataView 3.06.)
These software products are available for download from our Support site in the "Free Software" section.

Very easy to install and use; no programming necessary.

• The statistics are displayed on-screen: Maximum, Minimum, Average, Date and Time
• Display of the recorded values
• Possibility of zooming with automatic updating of the statistics
• Annotation of texts
• Automatic display of the value pointed to by the cursor
  Data export to spreadsheet or database
• Printing of curves or lists (tabulated) of the values
• Copy-Paste the graphs into other applications
• Programmable scales and units for all DC loggers
• Automatic selection of the Simple Logger model 

Simple Logger  

Configuration required:
System: Windows® 98, Me, NT, 2000 or XP.
Hardware: PC with 486 processor or higher, 8 MB free on hard disk for the application aqnd 400 KB per recording. RS232C serial port.

Version v6.20 is ideal for all the logger models EXCEPT FOR THE SIMPLE LOGGER L215.
Version v6.01 proposed below is specific to the SimpleLogger L215 AEMC model. 

Main functions
- Recovery of the measurements taken with an F27 clamp.
- Data acquisition by sampling from 1 min to 60 min.
- Digital and graphical display of the data.
- Possibility of printing out the different representations.
- Data export into EXCEL. 

System
Windows 98, Windows NT, Windows 2000 , Windows Me , Windows XP or Windows Vista.

Hardware
PC     

Designed for the DOX Series of METRIX oscilloscopes, EasyScope can be used to:

• process the data (CSV file);
• import screenshots and configurations;
• send SCPI commands;
• communicate via USB (with a PC or printer) and Ethernet (DOX3000);
• store the recordings on a USB key.

Compatibility Window XP(32 bits), Windows Vista(32 bits/64 bits), Windows 7(32 bits/64 bits) and Windows 8

Bilingual French-English version of the TestLink SE322 software for the C.A 834 sound level meter-recorder.
This software makes it very simple to:

• recover the data from the measuring instrument
• collect the data in real time from the instrument currently connected to the PC  

The MOT Micro-Ohmmeter Transfer software can be used to control the C.A 6240, C.A 6250, C.A 6255 and C.A 6292 micro-ohmmeters.

Main functions
The Micro-Ohmmeter Transfer software is a tool for:

• Configuring the instruments,
• Downloading and viewing the data stored in the memory,
• Exporting the measurement data into DataView or into a spreadsheet.

Caution: DataView is not supplied with the MOT software

EASYWAVE software is designed in order to allow you to:

- retrieve the curves from the oscilloscope mode

- edit the waveforms using drawing tools

- transfer or import toward the ARBitary function (4 memory locations)

- consult from the library of files (sine, square, ramp, pulse, noise, exponential...) 

The GTT (Ground Tester Transfer) software can be used to control the C.A 6470, C.A 6471 and C.A 6472/74 earth testers.
GTT is a tool for:

• Configuring the instruments,
• Downloading and viewing the data stored in the memory,
• Performing instantaneous acquisition operations,
• Exporting the measurement data into DataView (*.dvb files) or into an Excel spreadsheet (*.csv or *.xls files).
  Caution: DataView is not supplied with this version of GTT

The DTR Transfer software can be used to control the DTR8510 ratiometer.

The DTR Transfer software is a tool for :

• Configuring the instruments,
• Downloading and viewing the data stored in the memory,
• Exporting the data into Dataview

Caution : DataView is not supplied with the software DTR

GTC is a tool for:

- Configuring the instruments,
- Downloading and viewing the data stored in the memory and saving them (creation of a *.icp file)
- Perform instantaneous acquisition operations,
- Exporting the measurement data into DATAVIEW (*.dvb files) or an Excel spreadsheet (*.csv or *.xls files)

Caution: Dataview is not supplied with this version of GTC

This loader, new version v 1.09 allows you to update the firmware version of your ASYC IV.

Affected models

MTX3292B - MTX3293B -> firmware version  v 1.02

CA5292 - CA5293  -> firmware version  v 1.02

Note!

This Loader also allows you to change the language pack embedded in the multimeter - During installation you will be able to choose a language pack of two of the four possible languages (FR-GB, DE-GB, ES-GB or IT-GB).

Megohmmeter Transfer is a tool for:

- Configuring the instruments,
- Downloading and viewing the data stored in the memory and then saving them (creation of a *.icp file)
- Performing instantaneous acquisition operations,
- Exporting the measurement data into DATAVIEW (*.dvb) files or an Excel spreadsheet (*.csv or *.xls files)

Caution: Dataview is not supplied with this version of MEGOHMMETER Transfer 

The SL II Simple Logger II software allows you to control the Simple Logger II Loggers:

CL601, L101, L102, L111, L642, L261, L481, L562, AL834, ML912, ML914, L702, L404, L322, L432.

Simple Logger II software functions:

• Configure the devices,
• Download and display the data in memory,
• Make acquisitions in real time,
• Diplay recorded data on tables and / or graphs,
• Export data measurement to DataView (*.dvb files) or to a spreadsheet (Excel).  

Attention : DataView is not provided with SL II software

DataView v3.62.0016

Compatible instruments :

• PEL 102, PEL 103, PEL 104, PEL 105, PEL 106 power and energy loggers;
• F407 and F607 power and harmonics clamps;
• C.A 8220 and 8230 single-phase power analysers;
• Qualistar C.A 8331,8332, 8333,8334, 8335, 8435, 8436, 8336 and 8345.
• C.A 6526, 6532, 6534, 6543, 6547, 6549, 6550 and 6555 megohmmeters;
• C.A 6240, 6250, 6255 and 6292 micro-ohmmeters;
• C.A 6470N, 6471 and 6472 earth testers;
• C.A 6417 earth clamp;
• DTR 8510 ratiometer for transformers;
• Simple Logger II and L452;
• C.A 1110, 1227, 1246, 1821, 1822, 1510,1823, 10101, 10141 physical measurement devices;
• C.A 6116, 6116N and 6117 electrical installation testers

Languages

DataView is available in the following languages: German, English, Chinese, Spanish, French, Italian, Dutch, Polish, Swedish, Czech and Turkish

TACHOGRAPH software can be used for management of the data contained in the C.A 1727.

It has the following functionalities:

-          retrieval and display of the measurements recorded by the instrument,

-          the counting of the integral and the stemming of a curve (position and acceleration),

-          the filtration of a recording by moving average,

-          the exporting of the different curves acquired into EXCEL.

Systèms : Windows XP, Windows Seven, Windows 8 & Windows 10

Language : 5 languages (French, English, German, Spanish, Italian)

Version : v2.0 compatible with C.A 1727

Designed for Metrix and Chauvin-Arnoux digital oscilloscopes, SX-METRO can be used to:

• acquire, record and process the curves from the oscilloscope;
• import screenshots;
• save or restore configurations ;
• view the curves in real time;
• communicate with the oscilloscope via an RS232 serial link, USB or TCP/IP network;
• transfer the data into Excel or into a text file;
• perform mathematical processing such as FFT of the signal viewed (windowing, enlargement of the result, Y scale of the FFT in Volt or dB, measurements by markers).

Oscilloscopes

- OX5022, OX5042, CA 922, CA 942
- MTX162, MTX1052, MTX1054,
- MTX3252, MTX3352,
- MTX3354,
- OX7042, OX7062, OX7102, OX7104, OX7202, OX7204,
- OX6062, OX6152, OX6202, 
- OX2000, OX5100,
- OX8100, OX8050, OX8040, OX8062, OX8042,
- OX8620, OX8627, OX8020, OX8027, OX8032, OX8022.
- OXI6204
- OX9062, OX9102, OX9104, OX9302 BUS et OX9304 (with firmware version v1.10 or higher)

Languages
Version in 5 languages: English, German, Spanish, French and Italian. 

To download the software SX Metro v6.3, you need to download the .Zip file, extract all the files and then run the Setup.exe file.

With Datalogger software for DL53, you will be able to :

Setup the instruments,

Download and display the trends,

Export data into Excel

Compatible with Windows 7, 8, 8.1 and 10.

ICT is a tool for: