Suche
Suche in der Support-Site:
27 Ergebnis(se) :
Firmware : Camera CA1950 v1.09
Herunterladen
Installation
To upgrade your camera, you need to download the CameraLoader_Installer software.
Once installation has finished, run the program,...
Software for MTX1050-PC V1.4
Herunterladen
MTX1050-PC V1.4 List of the new functions in version 1.4 : Memory menu including a Max mode, detection of several peaks (up to...
SX Gene V2.1
Herunterladen
Designed for the METRIX GX1025, GX1050 & GX1030 generators, SX-GENE can be bused to:
control the generator and record or restore...
What is the coefficient of the Pitot tube with the reference P01654560 and what...
FAQs
The coefficient of this Pitot tube is 1, so the manometer does not require any correction when measuring the air speed. The tube’s accuracy is 1%...
Firmware update of the GX1025-1050
Herunterladen
File allowing you to update the Firmware of your GX1025-1050 To update your device, you have to follow the procedure findable page 61 in the User's...
Hello, I have some old Metrix multimeters. What are the current replacement...
FAQs
Hello, Below, you will find a summary of the instruments which can be replaced with the MTX 3290, MTX 3291, MTX 3292, MTX 3293, MTX 202, MTX...
SX-METRO v6.3 software
Herunterladen
Designed for Metrix and Chauvin Arnoux digital oscilloscopes, SX-METRO can be used to: acquire, record and process the curves from the...
Driver for MTX 1050-PC
Herunterladen
USB driver for MTX1050-PC Configuration: Windows 7/Vista/XP/2000 (v2.06.00)
DataView software
Herunterladen
DataView v3.62.0016 Compatible instruments : PEL 102, PEL 103, PEL 104, PEL 105, PEL 106 ; power and energy loggers; F407 and F607 power...
LabView LabWindows/CVI drivers for MX5060
Herunterladen
Driver for the MX5060 multimeter
What would be the current clamp adapted to my digital multimeter?
FAQs
Depending on your use case and the digital multimeter you have, you will find the appropriate current clamp on the document below. The...
LabView LabWindows/CVI drivers for OX 8050
Herunterladen
Drivers for OX8050 oscilloscopes
Hello, I would like to know if my Metrix device is remotely programmable. If...
FAQs
You will find on the file available on the link below the devices that can be programmed by SCPI (or IEEE 488.2) commands, as well as their...
C.A 7050 firmware
Herunterladen
Version D07 of the CERTILAN firmware is compatible with the C.A 7050 and C.A 7040 models upgraded to C.A 7050 models.
Megohmmeter Transfer software
Herunterladen
Megohmmeter Transfer is a tool for:
- Configuring the instruments,
- Downloading and viewing the data stored in the memory and then saving...
PC Software : CAmReport
Herunterladen
The CAmReport software is equipped with a very simple user interface for:
> Analysis of the thermograms with the following tools:
...
MOT Micro Ohmmeter Transfer
Herunterladen
The MOT Micro-Ohmmeter Transfer software can be used to control the C.A 6240, C.A 6250, C.A 6255 and C.A 6292 micro-ohmmeters.
Main...
Once I have zoomed on my signal, I no longer have access to the cursors. What...
FAQs
The cursors must be activated before activating the zoom and they will then be available to perform precise vertical and/or horizontal measurements.
Hello, I have a C.A 6250. After a few measurements (250 mOhms 10A), the...
FAQs
Hello, The current source of the instrument is protected against overheating. If a 10 A measurement lasts too long (more than several tens of...
LabView LabWindows/CVI drivers for Handscope
Herunterladen
Driver for OX5022/OX5042/OX5022B/OX5042B oscilloscopes
