The Greentest FTV100 solar power installation analyser analyses the efficiency of installations generating electricity by means of solar panels. The FTV100 is the ideal instrument for solar power professionals requiring measurements and recordings to check that installations are operating correctly. It is just as suitable for the housing sector as for solar power farms.
Measurements
DC and AC voltages, currents and power values are measured instantaneously and simultaneously.
The FTV 100 also measures the temperature and solar irradiation parameters needed to calculate the installation's efficiency. These parameters can be measured using the remote module for data acquisition as close as possible to the solar panels.
This module is linked to the FTV100 via a wired link or a Bluetooth link if necessary.
On the inverter output, it can be hooked up to both single-phase and three-phase electrical networks.
With the FTV100, all these measurements can be carried out on 1, 2 or 3 rows of panels set up in parallel (string).
On the 6 models in the SCOPIX III range, the sampling rate is 2.5 GS/s per channel in one-shot mode and 100 GS/s in repetitive mode. Equipped with a 12-bit converter, they offer a wide dynamic input range from 156 µV/div to 200 V/div. In addition, back-up on SD Card is available as a standard feature on all the SCOPIX® III models, giving you up to 2 GB of extra storage space.
The C.A 6116 is ideal for electricians and certification organizations for:
• initial electrical testing of new installations contrôle électrique initial d’une installation neuve
• electrical testing after renovation
• periodic electrical installation testing
• installation maintenance and repairs
The C.A 6116 makes it simple to carry out all the measurements recommended by the European standards on electrical installations without any risk of error. It also complies with the EN/IEC61557 international standard specifying high-performance installation testing equipment.
C.A 1886 & C.A 1888, the new RayCAm cameras equipped with the MIXVISION function
With a RayCAm, users can carry out precise analysis that matches reality, by adjusting the measurement distance, relative humidity, ambient temperature and emissivity. The C.A 1886 and C.A 1888 are equipped with a High-Resolution detector (384x288) for even greater accuracy. Up to 1,000 radiometric images can be stored and organized in 250 folders. The C.A 1886 & C.A 1888 are supplied with a removable SD card providing 2 GB of extra storage capacity. The C.A 1886 and C.A 1888 both offer the MixVision function, allowing users to choose the best display mode for their requirements: real image, infrared image or a mix of the two. The transparency can be set from 0 to 100%, so that any malfunctions can be located immediately.
Quick, comprehensive earth testing! The high-performance C.A 6472 earth tester and the C.A 6474 adapter for testing pylon earthing systems The C.A 6472 is a 5-in-1 instrument capable of measuring continuity, earth resistance, ground potential, earth coupling and soil resistivity. All the measurements are accessible directly with a rotary switch. It offers a wider measurement range from 0.001 Ω to 100 kΩ.
When hooked up to the C.A 6474, it can be used to check, measure and analyse pylon earthing systems.
