China
Finland
France
Germany
Italy
Netherlands
Poland
Romania
Spain
Sweden
CA 773 Voltage detector DDT/VAT
Voltage detector (DDT) with digital display for VAT. 1000V CAT IV. Voltage, Phase detection, Continuity, Phase rotation. IEC 61243-3, NF C 18-510 IP65
CA 762 Voltage detector DDT/VAT
CA 762 Voltage detector DDT/VAT
Electrical safety
Protection class
Product presentation
The CA 762 DDT/VAT is an essential tool for any electrician to check for the absence of voltage before working on any electrical installation connected to the mains.
Compliant with IEC 61243-3 Edition 3, it can be used on any indoor/outdoor installation 600 V CAT IV.
In order to meet the regulatory and legislative requirements of certain countries, the CA 762 is available in two versions, equipped or not equipped with IP2X accessories.
The test probe and cables are removable.
The CA 742 has a redundant safety system in case of power failure, the "ELV LED", which flashes as soon as the voltage exceeds 50 VAC / 120 VDC.
The CA 762's Full self-test checks the electrical circuits, power supply, displays and that the measuring leads are in good condition.
The CA 751 measuring accessory (optional) allows quick and easy checking of 2P+E sockets.
Features:
- CAT IV 600V
- IP65
- Full self-test
- Voltage detection, LED display 12...690 VAC / 750 VDC
- Automatic indication of voltage type (AC or DC) and polarity indication
- Single-pole phase control (single contact)
- Bipolar phase sequence control "2-wire method" = no third hand required
- Continuity test with audible and visual indication (R < 100 Ω)
- Extended continuity test with visual indication for R < 2 kΩ, 60 kΩ and 300 kΩ
- Compliant with IEC/EN 61243-3, DIN VDE 0682-401
- Removable cord and test probe
- Supplied complete and ready to use
Electrical safety
Protection class
Need information about our solutions? Our experts are available to advise and assist you with your project. Contact a sales representative now for a detailed presentation and an offer tailored to your needs.
Highlights
Comprehensive integrated self-test
Voltage test up to 690 VAC (16 2/3 Hz, 800 Hz)/750 VDC
Single-pole phase test
Phase sequence check up to 400 Hz
Continuity test
Removable test probes and cord
Features
Voltage detection
Voltage
12 Vac ≤ U ≤ 690 Vac 12 Vdc ≤ U ≤ 750 Vdc
Voltage detection
Frequency
DC, 16 2/3 to 800 Hz
Voltage detection
Impedance
> 400 kΩ
Voltage detection
Max current
3.5 mA RMS
Voltage detection
Polarity indication
Yes
Voltage detection
Dangerous voltage indication
The red ELV (Extra Low Voltage) indicator shows that the voltage is above the SELV (Safety Extra Low Voltage) and flashes faster as the present voltage increases.
Phase / Neutral identification
Beyond 120* V (45 - 65 Hz) Beyond 400 V (16 2/3 - 45 Hz)
Continuity with buzzer
Trigger threshold
100 Ω typical (150 Ω max.)
Continuity with buzzer
Extended continuity test
2 kΩ, 60 kΩ, 300 kΩ
Continuity with buzzer
Test current
≤ 1 mA
Continuity with buzzer
Open circuit voltage
≤ 3.3 V
Continuity with buzzer
Protection
Up to 1000 V
Continuity with buzzer
Phase rotation
2 wire method
Continuity with buzzer
Phase-to-phase voltage
50 V ≤ U ≤ 690 Vac
Continuity with buzzer
Frequency
Between 45 and 400 Hz
Buzzer
Intermittent beep for voltage detection and continuous beep for continuity
Degree of protection of the enclosure
Enclosure: IP65 Probes (optional): IP2X
Climatic conditions
Use from -15 °C to +45 °C / 20 to 95 % RH
Power supply
2 batteries 1.5V (LR03)
Autonomy
7000 measurements of 10 s
Dimensions / Weight
163 x 64 x 40 mm / 210 g
Documentation and support
Do you have a question about using or installing your measurement equipment? Our support team is available to provide you with quick and effective solutions. Contact support for personalized assistance.
Do you have a question about using or installing your measurement equipment? Our support team is available to provide you with quick and effective solutions. Contact support for personalized assistance.
References and accessories
To fully meet your expectations, a range of accessories is available that is compatible with your equipment. Feel free to add them to your quote request to obtain a complete and tailored solution.
CA 762 IP2X Voltage Detector
P01191762D
Voltage detector for VAT. Voltage, Phase detection, Continuity, Phase rotation. D4 IP2X touch points. IEC 61243-3, NF C 18-510, IP65, 600V CAT IV
CA 751 adapter for 2P+E socket
P01101997Z
CA 753 Measuring adapter for 2P+T socket
P01191748Z
Measuring adapter for 2P+T EU and Schuko sockets. For safe P (Phase), N (Neutral) and PE (Earth) measurement with any test tip. Indicates P-N voltage (> 200 V) and phase position.
Measurement and test tip(s) for DDT
P01102008Z
Removable red key tip for DDT-VAT / Connection via 4 mm diameter insulated female plug / Compliant with IEC 61243-3
Measurement and test accessory(ies) for DDT
P01102009Z
PVC lead with black touch point for DDT-VAT / Insulated D4mm angled female plug / Length 0.85 m / IEC 61243-3
Replacement caps
P01102033
Set of 10 replacement crystal safety caps for 2 mm diameter fine probe tips
Measurement and test accessory(ies) for DDT
P01295285Z
Set of 2 IP2X cords for DDT/VAT with IP2X D4 key tip - Ø4 mm angled female plug, length 0.25 m (red) and 0.85 m (black), compliant with IEC 61243-3 1000V
Test and measurement lead(s) for DDT
P01295462Z
Set of 2 IP2X cords for DDT/VAT (1 red, 1 black) / IP2X touch point D4 mm - angled female plug D4 mm / 15 A / 1.5 m / IEC 61243-3 1000V
Measuring and test lead(s) for DDT
P01295463Z
Set of 2 IP2X PVC leads for DDT/VAT / IP2X D2 mm touch point - D4 mm angled female plug / 15 A / 1.5 m / 600V CAT IV - 1000V CAT III
Storage and carrying case
P01298012
No10 soft case for transport and storage. Usable dimensions 180 x 75 x 45 mm
Storage and transport case
P01298065Z
Carrying and storage case, one compartment, useful dimensions 200x100x40 mm, with belt fastener.
Storage and transport bag
P01298074
Carrying case with inside pocket, hand strap and MultiFix accessory. Useful internal dimensions 120 x 200 x 60 mm
Hand strap
P03100824
Spare wrist strap for Chauvin Arnoux voltage detectors CA 742, CA 762
Measuring and testing accessory(ies) for DDT
P01102121Z
Accessory kit for DDT/VAT CA 74x/xN, CA 76x/xN, 1 black cord 1.10m with tip plug 4 insulated male and with a 4mm angled female plug, 2 touch points IP2X D4 RD/BK, IEC 61243-3 1000V
Measuring and testing tip(s) for DDT
P01102127Z
Set of 2 IP2X pushbuttons for DDT/VAT (1 red, 1 black) / D4 mm socket / 1000V CAT IV
Measuring and testing tip(s) for DDT
P01102128Z
Set of 2 D4 mm IP2X pushbuttons for DDT/VAT (1 red, 1 black) / D4 mm socket / IEC 61243-3 1000V
CA 762 VAT
P01191762Z
CA 751 adapter for 2P+E socket
P01101997Z
Measurement and test tip(s) for DDT
P01102008Z
Removable red key tip for DDT-VAT / Connection via 4 mm diameter insulated female plug / Compliant with IEC 61243-3
Measurement and test accessory(ies) for DDT
P01102009Z
PVC lead with black touch point for DDT-VAT / Insulated D4mm angled female plug / Length 0.85 m / IEC 61243-3
Replacement caps
P01102033
Set of 10 replacement crystal safety caps for 2 mm diameter fine probe tips
Measurement and test accessory(ies) for DDT
P01295285Z
Set of 2 IP2X cords for DDT/VAT with IP2X D4 key tip - Ø4 mm angled female plug, length 0.25 m (red) and 0.85 m (black), compliant with IEC 61243-3 1000V
Test and measurement lead(s) for DDT
P01295462Z
Set of 2 IP2X cords for DDT/VAT (1 red, 1 black) / IP2X touch point D4 mm - angled female plug D4 mm / 15 A / 1.5 m / IEC 61243-3 1000V
Storage and transport bag
P01298074
Carrying case with inside pocket, hand strap and MultiFix accessory. Useful internal dimensions 120 x 200 x 60 mm
Storage and carrying case
P01298012
No10 soft case for transport and storage. Usable dimensions 180 x 75 x 45 mm
Storage and transport case
P01298065Z
Carrying and storage case, one compartment, useful dimensions 200x100x40 mm, with belt fastener.
Hand strap
P03100824
Spare wrist strap for Chauvin Arnoux voltage detectors CA 742, CA 762
CA 753 Measuring adapter for 2P+T socket
P01191748Z
Measuring adapter for 2P+T EU and Schuko sockets. For safe P (Phase), N (Neutral) and PE (Earth) measurement with any test tip. Indicates P-N voltage (> 200 V) and phase position.
Measuring and test lead(s) for DDT
P01295463Z
Set of 2 IP2X PVC leads for DDT/VAT / IP2X D2 mm touch point - D4 mm angled female plug / 15 A / 1.5 m / 600V CAT IV - 1000V CAT III
Measuring and testing accessory(ies) for DDT
P01102121Z
Accessory kit for DDT/VAT CA 74x/xN, CA 76x/xN, 1 black cord 1.10m with tip plug 4 insulated male and with a 4mm angled female plug, 2 touch points IP2X D4 RD/BK, IEC 61243-3 1000V
Measuring and testing tip(s) for DDT
P01102127Z
Set of 2 IP2X pushbuttons for DDT/VAT (1 red, 1 black) / D4 mm socket / 1000V CAT IV
Measuring and testing tip(s) for DDT
P01102128Z
Set of 2 D4 mm IP2X pushbuttons for DDT/VAT (1 red, 1 black) / D4 mm socket / IEC 61243-3 1000V
Add one or more products to your quote request in just a few clicks. Our teams will analyze your needs and get back to you quickly with a personalized offer tailored to your requirements.
Similar products
