The brand new thermal camera designed and developed by Chauvin Arnoux, the DiaCAm2 C.A 1950, is particularly simple to use. It is ergonomically designed to provide a comfortable grip with direct access to the functions with just one hand. It offers an exceptional battery life of 13 hours and starts up in just 3 seconds so you don't waste any time.

application areas:

INDUSTRIAL MAINTENANCE
C.A 6522, C.A 6524 und C.A 6526
Periodic insulation tests on installations and equipment help to prevent incidents by setting up preventive maintenance designed to detect ageing and premature deterioration of their insulation characteristics:
• Measurement of insulation over a programmed duration
• Alarms and Pass/Fail indicator light (C.A 6526)
• PI and DAR ratios to determine the quality of the insulation, with the advantage of not being significantly influenced by the temperature
• Storage in memory to compare the measurement histories

TELECOMMUNICATIONS
C.A 6532
Ideal for measurements on telephone lines:
• Insulation tests at 50 V or 100 V
• Specific functions: measurement of resistance, capacitance, leakage current and AC voltage.
• Measurement of the difference in resistance between 2 wires in a pair by using the ΔREL function.
• Display of the length of the line being tested, thanks to programming of the linear capacitance in nF/km.

ELECTRONICS
Thanks to its wide test-voltage range from 10 V to 500 V, this model covers the specific requirements of the electronics industries, for both low-current applications and power stages. Its measurement range is from 2 kΩ to 50 GΩ. With appropriate electrodes, the 10 V and 100 V test voltages can also be used for electrostatic discharge applications.

SPECIAL
C.A 6536
With a variable test voltage from 10 V to 100 V in 1 V increments, this model is intended for special applications in sectors such as avionics, space and defence, which often require a low test voltage and strict adherence to the programmed value.

See our informative product video (3 minutes).
 
Click here for the product overview of the insulation tester.

Thanks to MAP curvature, it is possible to check the uniform illumination of a surface or a room. The Luxmeter C.A 1110 has a USB respectively Bluetooth interface. With the software current and stored measurement data can be displayed on the PC, the device can be configured and reports can be generated.

Designed to detect abnormally high temperatures such as fevers, the camera can be used to measure human body temperature with an accuracy of ± 0.5 °C. With a temperature range from +30 °C to +45 °C, it is an essential tool for identifying anyone with an excessively high temperature in order to combat epidemics.

In addition, by maintaining a distance of 1.5 metres between the operator and the person tested, there is no risk of contamination.

product page Body T° Camera C.A 1900
C.A 1900 data sheet
Video C.A 1900 (franz.)

The PEL104 and PEL106 will combine the benefits of the latest generation of PEL with we find all the measures that made the success of PEL: voltage measurements up to 1000V, current; powers and energies, as well as cos phi; the harmonic distortion rate. The new PELs offer the possibility of recording thanks to its Trends mode with a minimum acquisition step of 200ms. The reactive powers recorded will be broken down into powers N, D and Q1.
The PEL104 and PEL106 increase the communication possibilities compared to the first models in the range. In addition to WiFi, USB, Ethernet and BlueTooth, they now have a slot for a SIM card, which will allow GPRS communication.

The CA 6528 insulation tester is ideal for maintenance and repair operations on electrical equipment such as motors, cables, etc. Thanks to its "hands-free" bag, the CA 6528 insulation tester can be used without any constraints in the field. The shockproof sheath with stand (props) ensure stability on horizontal surfaces.
The large LCD screen can show the insulation value and the real test voltage simultaneously thanks to its double display. The backlighting makes it easy to read in all circumstances.

The C.A 1310 integrating sound level meter is a compact and lightweight meter that fits comfortably in the hand for easy measurement of noise levels in any environment: outdoors, in a factory, in offices, etc.... 

With the C.A 1310 you will know immediately if the noise levels in your environment are acceptable or exceed limits.

Product page Sound Level Meter CA 1310
C.A 1310 data sheet

<align="left"></align>

The LD DIDACTIC Group is one of the world's leading manufacturers of high-quality scientific and technical education systems for:

• Schools (secondary I and II)
• vocational schools
• Master / Technician Schools
• the extra-occupational training
• as well as universities and colleges

We have extensive expertise in physics, chemistry and biology and the related engineering disciplines.

More information can be found at www.ld-didactic.de.

Follow us on our new LinkedIn Business Channel. We look forward to networking and communicating with you. Just let us know what moves you in the area of measuring instruments.

Measurement is our passion and we would like to provide you with many valuable tips and information, which you are welcome to share with your team, new colleagues and business friends.

CHAUVIN ARNOUX Austria on Youtube!

On our YouTube channel we provide videos with general information about our company, product information about our measuring instruments and about the DataView® software - visit us and become a subscriber!