En poursuivant votre navigation, vous acceptez l'utilisation de cookies destinés à améliorer la performance de ce site et à vous proposer des services personnalisés. En savoir +

X

Software downloads

To take full advantage of this Support Site's functions, you are advised to log in.
 
  Please create your account if you do not already have one. You can modify the information which you have provided by clicking on My Account at any time.
  The Chauvin Arnoux Group strives to provide high-performance service online; if you have any remarks, please send us an email at support@chauvin-arnoux.com.

Search in download area


12 result(s) :

Megohmmeter Transfer software

The Megohmmeter Transfer software can be used to control the C.A 6543, C.A 6547, C.A 6549, C.A 6550, C.A 6555 and the new 1kV megohmmeters C.A 6526, C.A 6532 and C.A 6534.

Megohmmeter Transfer is a tool for:

- Configuring the instruments,
- Downloading and viewing the data stored in the memory and then saving them (creation of a *.icp file)
- Performing instantaneous acquisition operations,
- Exporting the measurement data into DATAVIEW (*.dvb) files or an Excel spreadsheet (*.csv or *.xls files)

Caution: Dataview is not supplied with this version of MEGOHMMETER Transfer
MEG v4.02.0056
meg_v4.02.0056.zip Updated : 11/09/2018 Language : Multilingual Version : v4.02.0056

GTC Ground Tester Clamp software

The GTC (Ground Tester Clamp) software can be used to control C.A 6417 communicating earth clamps.

GTC is a tool for:

- Configuring the instruments,
- Downloading and viewing the data stored in the memory and saving them (creation of a *.icp file)
- Perform instantaneous acquisition operations,
- Exporting the measurement data into DATAVIEW (*.dvb files) or an Excel spreadsheet (*.csv or *.xls files)

Caution: Dataview is not supplied with this version of GTC


Multilingual version: English, German, French, Spanish, Italian, Dutch, Polish, Romanian, Swedish and Chinese

gtc-v1.01.0007.zip Updated : 14/09/2018 Language : Multilingual Version : V1.01.0007

C.A 6116 firmware

Download the latest version of the firmware for the C.A 6116 and take advantage of the very latest improvements.

This self-extracting archive contains 6 files. It can be used to install version 2.00.2/1.09.5.

Pack1 installs the languages: DE-GB-ES-FR-IT
(Deutsch, English, Español, Français, Italiano).

Pack3 installs the languages: PL-GB-CS-DE-SV
(Polski, English, Cestina, Deutsch, Svenska).


CAUTION: If you use the ICT or DataView PC software with your C.A 6116, please also upgrade those products (versions concerned: ICT version 1.02.0011 and DataView 3.06.)
These software products are available for download from our Support site in the "Free Software" section.

reading_before_install.pdf Date de mise à jour : 21/06/2012 Langue : Multilingue Version : V3.
install-loader_v2.1_for_c.a6116_v2.00.2_v1.09.5_pack1.zip Date de mise à jour : 16/11/2012 Langue : Multilingue Version : V2.10
install-loader_v2.1_for_c.a6116_v2.00.2_v1.09.5_pack3.zip Date de mise à jour : 16/11/2012 Langue : Multilingue Version : V2.10

GTT Ground Tester Transfer

The GTT (Ground Tester Transfer) software can be used to control the C.A 6470, C.A 6471 and C.A 6472/74 earth testers.
GTT is a tool for:

  • Configuring the instruments,
  • Downloading and viewing the data stored in the memory,
  • Performing instantaneous acquisition operations,
  • Exporting the measurement data into DataView (*.dvb files) or into an Excel spreadsheet (*.csv or *.xls files).
    Caution: DataView is not supplied with this version of GTT
GTT v1.04.0025
gtt_v1.04.0025.zip Updated : 11/09/2018 Language : Multilingual Version : V1.04.0025

MOT Micro Ohmmeter Transfer

The MOT Micro-Ohmmeter Transfer software can be used to control the C.A 6240, C.A 6250, C.A 6255 and C.A 6292 micro-ohmmeters.


Main functions
The Micro-Ohmmeter Transfer software is a tool for:

  • Configuring the instruments,
  • Downloading and viewing the data stored in the memory,
  • Exporting the measurement data into DataView or into a spreadsheet.

Caution: DataView is not supplied with the MOT software

MOT_v1.06.0013 
Software upgrade / optimization   

 

mot.zip Updated : 11/04/2018 Language : Multilingual Version : V1.06.0013

Firmware for C.A 6116N and C.A 6117

The C.A 6116N and C.A 6117 are ALL-IN-ONE tools for testing electrical installations according to the national and international standards (IEC 60364-6, NF C 15-100, VDE 100, XP C 16-600, etc). They combine design, ergonomics, simplicity, performance, rapidity and accuracy. Suitable for all types of neutral systems (TT, TN, IT), it is ideal for use in all sectors: industry, tertiary and housing.

Loader for C.A 6116N and C.A 6117

Download the latest version of the firmware for the C.A 6116N and C.A 6117 and take advantages of the very latest improvements.

This self-extracting archive contains 6 files. It can be used to install version 2.00.10.


Hinweis für alle österreichischen Kunden!

!!! Hinweis für „comSchäcke“ Anwender!!!

 

Bitte laden Sie diese Gerätefirmware nicht auf Ihr C.A 6117 Messgerät!

Die Kommunikation mit Ihrer Auswertesoftware „comSchäcke“ funktioniert danach nicht mehr richtig.

comSchäcke“ unterstützt nur die  Firmware v1.06.4 oder v2.00.9.

Die Firmware v2.00.9 steht unten zum Download zur Verfügung.

 

Wenn Sie Fragen haben bzw. Hilfe benötigen, kontaktieren Sie bitte die österreichische Niederlassung (mailto: vie-office@chauvin-arnoux.at).


Note for all Austrian customers!

!!!Note for „comSchäcke“ users!!!

 

Please do not install the v2.00.10 firmware version into your C.A 6117 instrument!

The communication with your report software „comSchäcke“ will no longer work properly.

comSchäcke“ supports only the firmware v1.06.4 or v2.00.9.

The v2.00.9 is available for download below.

 

If you have any questions or need help, please contact the Austrian subsidiary (mailto: vie-office@chauvin-arnoux.at).

Pack1 installs the languages : DE-GB-ES-FR-IT
(Deutsch, English, Español, Français, Italiano).

Pack2 installs the languages : PL-GB-CS-DE-SV
(Polski, English, Cestina, Deutsch, Svenska).

Pack4 installs the languages : GB-SV-Fi-GB-GB
(English, Svenska, Suomi, English, English).


CAUTION: If you use the ICT or DataView software for PC with your device, please also upgrade that software too.
These software products are available for download from our Support site in the "Free software" section.

 

ca_611x-_reading_before_install.pdf Updated : 09/17/2018 Language : Multilingual Edition 10 - 2018
install-loader_for_c.a_6117_v3.00.0_2.00.10_pack1.exe Updated : 09/17/2018 Language : Pack 1 Loader version : v6.10 Firmware version : v2.00.10
install-loader_for_c.a_6117_v3.00.0_2.00.10_pack2.exe Updated : 09/17/2018 Language : Pack 2 Loader version : v6.10 Firmware version : v2.00.10
install-loader_for_c.a_6117_v3.00.0_2.00.10_pack4.exe Updated : 09/17/2018 Language : Pack 4 Loader version : v6.10 Firmware version : v2.00.10
install-loader_for_c.a_6117_v3.00.0_2.00.09_pack1.exe Updated : 05/04/2018 Language : Pack 1 Loader version : v6.09 Firmware version : v2.00.09
install-loader_for_c.a_6117_v3.00.0_2.00.09_pack2.exe Updated : 05/04/2018 Language : Pack 2 Loader version : v6.09 Firmware version : v2.00.09
install-loader_for_c.a_6117_v3.00.0_2.00.09_pack4.exe Updated : 05/04/2018 Language : Pack 4 Loader version : v6.09 Firmware version : v2.00.09

Data Logger Transfer

Data Logger Transfer software allows you to pilot your loggers.

With the software Data Logger Transfer, you will be able to :

Setup the instruments,
Download and display the trends,
Display real time values,
Display data in curves or table,
Export automatic reports in Word (.docx format), 
Export data into Dataview (.dvb files) or into Excel

Compatible with Windows 7, 8, 8.1 and 10.

Attention : DataView is not provided with the software Data Logger Transfer

dl-2.02.0048.zip Updated : 26/04/2018 Language : Multilingual Version : v2.02.0048

DTR Transfer

The DTR Transfer software can be used to control the DTR8510 ratiometer.


The DTR Transfer software is a tool for :

  • Configuring the instruments,
  • Downloading and viewing the data stored in the memory,
  • Exporting the data into Dataview

Caution : DataView is not supplied with the software DTR

DTR_v1.02.0005   
Software update / optimization    
dtr_v1.02.005.zip Updated : 11/09/2018 Language : Multilingual Version : V1.02.0005

PAT Power Analyser Transfer

 
 

The PAT Power Analyser Transfer software can be used to control the C.A 8220/8230 single-phase wattmeters and Qualistar C.A 8331/8332/8333/8334/8335/8336/8435/8436 energy analysers, as well as the F407 & F607 multimeter clamps.


The PAT software is a tool for:

  • Configuring the instruments,
  • Downloading and viewing the data stored in the memory,
  • Performing instantaneous acquisition operations,
  • Displaying the data as a table or graph,
  • Exporting the measurement data into DataView (*.dvb files) or into a spreadsheet.  

    The main changes on PAT2 are:
    · Ability to read directly on your computer an SD card from a QualistarPlus in V4.3 firmware.

    · Bugs fixed

    Caution: DataView is not supplied with the PAT software

The pack version v4.5.3 includes PAT version v3.07.0044 and PAT2 version v1.5.11064.

pat-pat2_v4.5.3.zip Updated : 25/06/2018 Language : Multilingual Version : V4.5.3

DataView Suite

DataView is a powerful tool for configuration, transfer and processing of measurement data for an extensive range of Chauvin Arnoux measuring instruments. The DataView Suite groups the DataView report editor and the PEL Transfer, PAT, GTT, ICT, DTR, SLII and MOT application software.

DataView v3.53.0012

Compatible instruments:

  • PEL 102, PEL 103 and PEL 105 power and energy loggers;
  • F407 and F607 power and harmonics clamps;
  • C.A 8220 and 8230 single-phase power analysers;
  • Qualistar C.A 8331,8332, 8333,8334, 8335, 8435, 8436 and 8336 three-phase power analysers;
  • C.A 6543, 6547, 6549, 6550 and 6555 megohmmeters;
  • C.A 6240, 6250, 6255 and 6292 micro-ohmmeters;
  • C.A 6470N, 6471 and 6472 earth testers;
  • DTR 8510 ratiometer for transformers;
  • Simple Logger II and L452;
  • C.A 1110, 1227, 1246, 1821, 1822, 1510 and 1823 physical measurement devices;
  • C.A 6116, 6116N and 6117 electrical installation testers.

Languages

DataView is available in the following languages: German, English, Chinese, Spanish, French, Italian, Dutch, Polish, Swedish, Czech and Turkish.

dataview_3.53.0012.zip Updated : 03/07/2018 Language : Multilingual Version : V3.53.0012

PEL Transfer

The PEL Transfer software can be used to control the PEL102, PEL103 and PEL105 power and energy loggers.


The PEL Transfer software is a tool for:

  • Configuring the instruments,
  • Downloading and viewing the data stored in the memory,
  • Performing instantaneous acquisition operations,
  • Displaying the data in the form of tables or graphs,
  • Exporting the measurement data into (*.dvb files) or into a spreadsheet.

This evolution brings new features:
- Add finish language
- Few minor bugs fixed.

Compatible with Windows 7, 8, 8.1 and 10
Caution : DataView is not supplied with the PEL Transfer software

pel_v2.02.11024.zip Updated : 23/07/2018 Language : Multilingual Version : v2.2.11024

ICT software

The ICT (Installations Tester Transfer) software can be used to control the C.A 6116, C.A 6116N & C.A 6117 electrical installation testers.

ICT is a tool for:

  • Preparing measurement campaigns,
  • Downloading and viewing the data stored in the memory,
  • Preparing the installation test reports,
  • Exporting the data into DataView to produce reports or into an Excel spreadsheet.

    Caution: DataView is not delivered with this version of ICT

ICT v1.07.0021

Main improvements: 
Software upgrade / optimization

Languages
Multilingual version: English, German (Germany, Austria, Switzerland), French (France, Switzerland), Spanish, Italian (Italy, Switzerland), Dutch, Czech, Finnish and Swedish.

Compatible with Windows 7, 8, 8.1 and 10

 

ict_v1.07.0021.zip Updated : 11/09/2018 Language : Multilingual Version : V1.07.0021