Descubra los sitios del grupo Iniciar sesión Crear mi cuenta

Mensaje de advertencia

This form submits changes to your default configuration.

Descargas de software

Para que usted pueda beneficiarse de la mejor forma posible de las funciones de este Sitio de soporte, se recomienda que se identifique.
No dude en crear una cuenta si aún no lo ha hecho. Haciendo clic en Mi Cuenta, usted puede en cualquier momento cambiar la información que nos ha facilitado.

El grupo Chauvin Arnoux desea proporcionarle un servicio on line eficiente; si desea hacernos llegar sus comentarios, envíenos un correo electrónico a support@chauvin-arnoux.com.

Buscar en el espacio de descarga


14 resultado(s) :

C.A 6116 firmware

Download the latest version of the firmware for the C.A 6116 and take advantage of the very latest improvements.

This self-extracting archive contains 6 files. It can be used to install version 2.00.2/1.09.5.

Pack1 installs the languages: DE-GB-ES-FR-IT
(Deutsch, English, Español, Français, Italiano).

Pack3 installs the languages: PL-GB-CS-DE-SV
(Polski, English, Cestina, Deutsch, Svenska).


CAUTION: If you use the ICT or DataView PC software with your C.A 6116, please also upgrade those products (versions concerned: ICT version 1.02.0011 and DataView 3.06.)
These software products are available for download from our Support site in the "Free Software" section.

reading_before_install.pdf Date de mise à jour : 21/06/2012 Langue : Multilingue Version : V3.
install-loader_v2.1_for_c.a6116_v2.00.2_v1.09.5_pack1.zip Date de mise à jour : 16/11/2012 Langue : Multilingue Version : V2.10
install-loader_v2.1_for_c.a6116_v2.00.2_v1.09.5_pack3.zip Date de mise à jour : 16/11/2012 Langue : Multilingue Version : V2.10

MOT Micro Ohmmeter Transfer

The MOT Micro-Ohmmeter Transfer software can be used to control the C.A 6240, C.A 6250, C.A 6255 and C.A 6292 micro-ohmmeters.


Main functions
The Micro-Ohmmeter Transfer software is a tool for:

  • Configuring the instruments,
  • Downloading and viewing the data stored in the memory,
  • Exporting the measurement data into DataView or into a spreadsheet.

Caution: DataView is not supplied with the MOT software

MOT_v1.07.0010
Software upgrade / optimization   

 

mot_v1.07.0010.zip Updated : Nov 2019 Language : Multilingual Version : V1.07.0010

GTT Ground Tester Transfer

The GTT (Ground Tester Transfer) software can be used to control the C.A 6470, C.A 6471 and C.A 6472/74 earth testers.
GTT is a tool for:

  • Configuring the instruments,
  • Downloading and viewing the data stored in the memory,
  • Performing instantaneous acquisition operations,
  • Exporting the measurement data into DataView (*.dvb files) or into an Excel spreadsheet (*.csv or *.xls files).
    Caution: DataView is not supplied with this version of GTT
gtt_v1.05.0003.zip Updated : Nov 2019 Language : Multilingual Version : V1.05.0003

DTR Transfer

The DTR Transfer software can be used to control the DTR8510 ratiometer.


The DTR Transfer software is a tool for :

  • Configuring the instruments,
  • Downloading and viewing the data stored in the memory,
  • Exporting the data into Dataview

Caution : DataView is not supplied with the software DTR

DTR_v1.02.0009
Software update / optimization    
dtr_v1.02.0009.zip Updated : Nov 2019 Language : Multilingual Version : V1.02.0009

GTC Ground Tester Clamp software

The GTC (Ground Tester Clamp) software can be used to control C.A 6417 communicating earth clamps.

GTC is a tool for:

- Configuring the instruments,
- Downloading and viewing the data stored in the memory and saving them (creation of a *.icp file)
- Perform instantaneous acquisition operations,
- Exporting the measurement data into DATAVIEW (*.dvb files) or an Excel spreadsheet (*.csv or *.xls files)

Caution: Dataview is not supplied with this version of GTC


gtc_v1.02.0004.zip Updated : Nov 2019 Language : Multilingual Version : V1.02.0004

Megohmmeter Transfer software

The Megohmmeter Transfer software can be used to control the C.A 6543, C.A 6547, C.A 6549, C.A 6550, C.A 6555 and the new 1kV megohmmeters C.A 6526, C.A 6532 and C.A 6534.

Megohmmeter Transfer is a tool for:

- Configuring the instruments,
- Downloading and viewing the data stored in the memory and then saving them (creation of a *.icp file)
- Performing instantaneous acquisition operations,
- Exporting the measurement data into DATAVIEW (*.dvb) files or an Excel spreadsheet (*.csv or *.xls files)

Caution: Dataview is not supplied with this version of MEGOHMMETER Transfer
meg_v4.02.0071.zip Updated : Nov 2019 Language : Multilingual Version : v4.02.0071

SL II Simple Logger II

The SL II Simple Logger II software allows you to control the Simple Logger II Loggers:

CL601, L101, L102, L111, L642, L261, L481, L562, AL834, ML912, ML914, L702, L404, L322, L432.


Simple Logger II software functions:

  • Configure the devices,
  • Download and display the data in memory,
  • Make acquisitions in real time,
  • Diplay recorded data on tables and / or graphs,
  • Export data measurement to DataView (*.dvb files) or to a spreadsheet (Excel).  

Attention : DataView is not provided with SL II software

slii_v1.05.0009.zip Updated : Nov 2019 Language : Multilingual Version : V1.05.0009

DataView software

DataView is a powerful tool for configuration, transfer and processing of measurement data for an extensive range of Chauvin Arnoux measuring instruments. The DataView Suite groups the DataView report editor and the PEL Transfer, PAT, PAT2, Data Logger, GTC, GTT, ICT, DTR, SLII MEG and MOT application software. For the download, a software key will be requested. this key is attached to the CDrom you received following the DataView software purchase.

DataView v3.62.0016

Compatible instruments :

    • PEL 102, PEL 103, PEL 104, PEL 105, PEL 106 power and energy loggers;
    • F407 and F607 power and harmonics clamps;
    • C.A 8220 and 8230 single-phase power analysers;
    • Qualistar C.A 8331,8332, 8333,8334, 8335, 8435, 8436, 8336 and 8345.
    • C.A 6526, 6532, 6534, 6543, 6547, 6549, 6550 and 6555 megohmmeters;
    • C.A 6240, 6250, 6255 and 6292 micro-ohmmeters;
    • C.A 6470N, 6471 and 6472 earth testers;
    • C.A 6417 earth clamp;
    • DTR 8510 ratiometer for transformers;
    • Simple Logger II and L452;
    • C.A 1110, 1227, 1246, 1821, 1822, 1510,1823, 10101, 10141 physical measurement devices;
    • C.A 6116, 6116N and 6117 electrical installation testers

Languages

DataView is available in the following languages: German, English, Chinese, Spanish, French, Italian, Dutch, Polish, Swedish, Czech and Turkish

dataview_v3.61.0008.zip Updated : Nov 2019 Language : Multilingual Version : v3.61.0008
dataview_v_3.62.0016.zip Updated : 01/2023 Language : Multilingual Version : v3.62.0016

PAT-Power Analyser Transfer

 The PAT Power Analyser Transfer software can be used to control the single-phase wattmeters and energy analysers, as well as the multimeter clamps.


The PAT software is a tool for:

  • Configuring the instruments,
  • Downloading and viewing the data stored in the memory,
  • Performing instantaneous acquisition operations,
  • Displaying the data as a table or graph,
  • Exporting the measurement data into DataView (*.dvb files) or into a spreadsheet.  

For CA 8220/8230 CA 8332/32B/34/34B, CA8335/8435 (firmware versions v3.x) and F407 F607 use PAT, the main changes on PAT are :

    • bugs fixed.

For CA 8331/33/36, CA 8436 et CA8335 (firmware version v4.x) use PAT2, the main changes on PAT2 are :

      • added new language bulgarian
      • bugs fixed.


Caution: DataView is not supplied with the PAT/PAT2 softwares

pat-v3.08.0018.zip Updated : Nov 2019 Language : Multilingual Version : v3.08.0018
pat2-v1.07.13010.zip Updated : Feb 2020 Language : Multilingual Version : v1.07.13010

Firmware for CA 6116N and CA 6117

The CA 6116N and CA 6117 are ALL-IN-ONE tools for testing electrical installations according to the national and international standards (IEC 60364-6, NF C 15-100, VDE 100, XP C 16-600, etc). They combine design, ergonomics, simplicity, performance, rapidity and accuracy. Suitable for all types of neutral systems (TT, TN, IT), it is ideal for use in all sectors: industry, tertiary and housing.

Loader for CA 6116N and CA 6117

Download the latest version of the firmware for the CA 6116N and CA 6117 and take advantages of the very latest improvements.

This self-extracting archive contains 6 files. It can be used to install version 2.00.20.

 

Pack1 installs the languages : DE-GB-ES-FR-IT
(Deutsch, English, Español, Français, Italiano).

Pack2 installs the languages : PL-GB-CS-DE-SV
(Polski, English, Cestina, Deutsch, Svenska).

Pack4 installs the languages : GB-SV-Fi-GB-GB
(English, Svenska, Suomi, English, English).


CAUTION: If you use the ICT or DataView software for PC with your device, please also upgrade that software too.
These software products are available for download from our Support site in the "Free software" section.

 

ca_611x-_reading_before_install.pdf
install-loader_for_ca6117-v3.00.0_2.00.20_pack1.exe Update : 07/2022 Langue : Pack1 Firmware Version : 2.00.20
install-loader_for_ca6117-v3.00.0_2.00.20_pack2.exe Update : 07/2022 Langue : Pack2 Firmware Version : 2.00.20
install-loader_for_ca6117-v3.00.0_2.00.20_pack4.exe Update : 07/2022 Langue : Pack4 Firmware Version : 2.00.20

PEL Transfer

The PEL Transfer software can be used to control the PEL51, PEL52, PEL102, PEL103, PEL104, PEL105 and PEL106 power and energy loggers.


The PEL Transfer software is a tool for:

  • Configuring the instruments,
  • Downloading and viewing the data stored in the memory,
  • Performing instantaneous acquisition operations,
  • Displaying the data in the form of tables or graphs,
  • Exporting the measurement data into (*.dvb files) or into a spreadsheet.

This evolution brings new features:
- Add czech language
- bugs fixed.

Compatible with Windows 7, 8, 8.1 and 10
Caution : DataView is not supplied with the PEL Transfer software

pel_transfer_v2.7.14501.zip Update : 06/2022 Language : Multilingual Version : v2.7.14501

ICT Software

The ICT (Installations Tester Transfer) software can be used to control the C.A 6116, C.A 6116N & C.A 6117 electrical installation testers.

ICT is a tool for:

  • Preparing measurement campaigns,
  • Downloading and viewing the data stored in the memory,
  • Preparing the installation test reports,
  • Exporting the data into DataView to produce reports or into an Excel spreadsheet.

    Caution: DataView is not delivered with this version of ICT
ICT v1.08.0009

Main improvements: 
Software upgrade / optimization


Compatible with Windows 7, 8, 8.1 and 10

ict_v1.08.0009.zip Updated Feb 2023 Languages : Multilingal Version : V1.08.0009

Data Logger Transfer

Data Logger Transfer software allows you to pilot your loggers.

With the software Data Logger Transfer, you will be able to :

  • Setup the instruments,
  • Download and display the trends,
  • Display real time values,
  • Display data in curves or table,
  • Export automatic reports in Word (.docx format), 
  • Export data into Dataview (.dvb files) or into Excel

Compatible with Windows 7, 8, 8.1 and 10.

AttentionDataView is not provided with the software Data Logger Transfer

data_logger_transfer_v2.2.0284.zip Updated : April2023 Language : Multilingual Version : v2.2.0284

PAT 3 Software v1.04 & Samples

The PAT 3 Software - Power Analyser Transfer allows you to control your CA 8345 energy analyser.

To download this software, please click on the entilted file "X05077D00_PAT3_1.04" and unzip it. After that, double click on the "Setup.exe" to install it.

The PAT 3 Software is a tool for :

  • Configure your CA 8345,
  • Download and view data in memory,
  • Make instantaneous acquisitions,
  • Display the data in tabular or graphical form,
  • Export measurement data to DataView (*.dvb files) or to a spreadsheet.

Once the PAT 3 software is installed, you can download the samples below which are available to you. To do this, download the file and unzip it. Once you have done this, save the file to /DataView/DataFiles/Qualistar Class A.

Recordings samples are :

  • Trends
  • Alarms
  • Configuration
  • Inrush
  • Monitoring
  • Photos
  • Transcients
pack_sample_pat3.zip Mise à jour : 11/2022
x05077d00_pat3_1.04.zip Updated : 03/2024 Language : Multilingual Version : 1.04