CP210x USB to UART Bridge Controller
USB to optical link adapter (USB-RS232)
WARNING
If a previous version is already installed on the PC, you must uninstall it:
- Click ‘Start’, then ‘Control Panel’, then ‘Add or Remove Programmes’,
- In the ‘Currently installed programmes’ section, select the programme to be removed (of the type ‘CP2101 USB to UART Bridge Controller’), then click ‘Remove’,
- Click ‘Yes’ if a confirmation prompt appears.
Compatible with the following devices:
METRIX multimeters:
- X5060 (USB connection)
- MTX3281 (optical connection)
- MTX3282 (optical connection)
- MTX3283 (optical connection)
- MTX3281B (optical connection)
- MTX3282B (optical connection)
- MTX3283B (optical connection)
- MTX3290 (optical connection)
- MTX3291 (optical connection)
- MTX3292 (optical connection)
- MTX3293 (optical connection)
- MX26 (optical connection)
- MX58HD (with RS232 option)
- MX59HD (with RS232 option)
- MX53C (with RS232 option)
- MX54C (with RS232 option)
- MX56C (with RS232 option)
- MX556 (RS232 connection)
- MTX3250 (RS232 connection)
METRIX HandScope:
- OX5022 (optical/USB connection)
- OX5022B (optical/USB connection)
- OX5042 (optical/USB connection)
- OX5042B (optical/USB connection)
CHAUVIN ARNOUX multimeter:
- CA 5292 (optical connection)
- CA 5293 (optical connection)
CHAUVIN ARNOUX HandScope:
- CA 922 (optical/USB connection)
- CA 942 (optical/USB connection)
V6.7.6:
- Windows 8.1 (x86 32/64-bit)
- Windows 8 (x86 32/64-bit)
- Windows 7 (x86 32/64-bit)
V11.3.0:
- Windows 10 version 1803 and later (x64, x86)
- Windows 11 (x64)