Complete and lightweight, the MX 535 multifunction installation tester offers all the essential functions for checking the safety of electrical installations according to the applicable standards: NF C 15-100, FDC 16-600, EN 61557, etc.

Particularly aimed at self-employed electricians, contractors, installers, certification organizations and maintenance teams, it offers a good price/performance trade-off. The MX 535 can be used to run automatic test sequences and store the results. Earth measurement is performed by the stake method with loop measurement.

Ergonomic:

The MX 535 has been designed to offer exceptionally simple use: - Compact and lightweight, - Direct access to all the measurements and functions on the front panel, - Explicit markings on the terminal strip to prevent any risk of connection errors, - Backlit LCD screen for easy reading, - Visual indication of the test result: OK/NOK

The MX 535 includes several solutions for hands-free working: a magnetized casing, a neck strap, built-in stand.

Dedicated accessories for greater simplicity:

• A continuity rod can be used to access measurement points which are difficult to reach, such as lighting.
• A three-pole cable has also been developed for direct measurements on 2P+E sockets.
• A remote-control probe (option) can be used to start and store the results of all remote tests.
• 20-hour battery life with batteries rechargeable via a USB charger

Main technical specifications:

• Voltage measurement: 550 VAC / 800 VDC
• Frequency measurement: 30 Hz to 999.9 Hz,
• Continuity at 200 mA, - Resistance from 1 to 99.99 kΩ
• Insulation: 250V, 500V and 1 kV test voltage, measurement up to 999 MΩ
• 3P earth (stakes): up to 2,000 Ω
• Zs (Z L-PE) loop without tripping: 1 to 2,000 Ω, calculation of Ik
• Zs (Z L-PE) high-current loop with tripping, calculation of Ik
• Type AC & A RCDs: 30mA, 100mA, 300 mA, 500 mA, 650 mA
• RCD in pulse mode: tripping time
• RCD in ramp mode (30 mA): tripping current
• Automatic RCD test sequence: No trip -Pulse-Ramp
• Automatic test sequence: Loop-RCD-MΩ
• Phase rotation: 45 to 550V; 45 to 65 Hz
• Data storage: 30 sites with 99 tests each using the MEM key or the optional remote-control probe
• Current and leakage current (with clamp): 2 A / 200 A ranges
• Electrical safety: IEC 61010, 300 V CAT III

• Earth measurement by stake and loop methods
• Continuity measurement at 0.2 A
• Insulation testing RCD testing: current and trip time
• Automatic test sequences
• Storage of test results
• ANDROID application for report generation
• Power supply by mains-rechargeable batteries, USB socket or vehicle cigarette lighter

To fully meet your expectations, a range of accessories is available that is compatible with your equipment. Feel free to add them to your quote request to obtain a complete and tailored solution.