The <strong>E94 clamp is a current clamp</strong> using a Hall-effect cell to measure alternating or direct currents without any action on the installation (no need to cut off the current to be measured).

This clamp's mains strengths include:

• Compact design and ergonomic shape for use in spaces where access is difficult.
• Measurement sensitivity.
• Simple, safe use.

The E94 clamp can be used to <strong>measure currents from 100 mA to100 A peak with 2 ranges: 10 A and 100 A</strong>. The bandwidth extends from DC to 100 kHz (3 dB).

It is equipped with:

• a "Zero DC" pushbutton function for which the parameters are saved,
• meters:

Its specific feature: the lead for the output signal is equipped with a moulded 4-pin connector compatible with the latest-generation Qualistar Class A models from Chauvin Arnoux. The clamp is then powered by the instrument. The specific connector allows automatic recognition of the clamp by the instrument.

<strong>E94 AC/DC clamp</strong>

• Current range from 100 mA to100 A
• 2 calibres: 10 A and 100 A
• Bandwidth from DC to 100 kHz
• Clamping diameter: 11.8 mm
• IEC 61010 CAT III – 600 V / Cat IV - 300 V
• Dimensions: 231 x 36 x 67 mm
• Weight: 270 g
• Cable length 3 m
• 2-year warranty

The E94 is delivered with a User's Manual</p>

. Rated AC and DC current

· Output signal: DC voltage

· Output via lead and Qualistar-type connector

·
Automatic configuration

To fully meet your expectations, a range of accessories is available that is compatible with your equipment. Feel free to add them to your quote request to obtain a complete and tailored solution.