China
Finland
France
Germany
Italy
Poland
Romania
Spain
Sweden
United Kingdom
MX1 Analogue multimeter
MX1 Analogue multimeter. Audible continuity with voltage presence indication. IP65 sealing, 600V CAT III
CA 5011 Analogue/digital multimeter
CA 5011 Analogue/digital multimeter
Analogue device
Guarantee
Actual effective measurement
Product presentation
The CA 5011 TRMS multimeter provides the true effective value regardless of the signal, whether sinusoidal or distorted.
It is therefore suitable for all types of installations, even those with so-called non-linear loads.
Features:
- Automatic AC/DC recognition
- AC/DC voltage: 400 mV to 600 V (5 ratings)
- Operating frequency: 20 Hz to 10 kHz
- Typical accuracy: 0.5%
- Impedance: 10 MΩ
- AC/DC current: 400 µA to 10 A (6 ranges)
- Resistance: 400 Ω to 40M Ω (6 ranges)
- Continuity test: (R < 400 Ω) and diode
- Frequency: 4 kHz to 400 kHz (3 ratings)
- dB scale reading from -20 to 16 dB
- Fuse indicator light
- "Voltest" indicator light showing voltage presence in ohmmeter and continuity
- Max and Hold functions
- Can be used as a zero galvanometer
- Backlight
- Dimensions: 160 x 105 x 56 mm
- Weight: 500g
- Use on any installation rated CAT III 600 V or less according to IEC/EN 61010-1 Edition 2
Analogue device
Guarantee
Actual effective measurement
Need information about our solutions? Our experts are available to advise and assist you with your project. Contact a sales representative now for a detailed presentation and an offer tailored to your needs.
Features
DC and AC Voltage
2 x 5 ranges 400 mV / …; / 1000 V(1)
Impedance
10 MΩ
Frequency of use (2)
20 Hz / …; / 10 kHz
DC and AC Current
2 x 6 ranges: 400 µA / …; / 10 A
Resistance (3)
6 ranges: 400 Ω / …; / 40 MΩ
Audible continuity test (3)
R < 400 Ω
Frequency
3 ranges: 4 kHz / …; / 400 kHz
dB scale for VAC
-20 dB …; +16 dB
Max value
Over 500 ms
Typical accuracies (4)
1% in Vdc and Ω, 1.5% in Adc
Power supply
1 battery 9 V 6LR61
Autonomy
300 hours
Electrical safety (5)
IEC 61010-1 Edition 2 600 V CAT IV
Protection (6)
HPC fuses 1 A and 10 A
Degree of protection
IP 53
Climatic conditions
-10 °C …; +55 °C and RH < 90 %
Dimensions / Weight
160 x 105 x 56 mm / 500 g
Documentation and support
Do you have a question about using or installing your measurement equipment? Our support team is available to provide you with quick and effective solutions. Contact support for personalized assistance.
References and accessories
To fully meet your expectations, a range of accessories is available that is compatible with your equipment. Feel free to add them to your quote request to obtain a complete and tailored solution.
CA 5011
P01196311E
Spare fuse(s)
P01297038
Spare fuse 6x32, breaking capacity 10A, 500V, 10kA, HPC (supplied in quantities of 10)
Spare fuse(s)
P01297039
Spare fuse size 6x32, breaking capacity 1A, 500V, 10kA, HPC (supplied in quantities of 10)
Storage and transport bag
P01298033
Carrying case with strap for multimeter and multimeter clamp. Useful dimensions 225 x 270 x 70 mm
Storage and transport case
P01298036
Carrying case No5. For storing the luminaire and its cords. Usable dimensions 180 x 220 x 75 mm
Storage and transport case
P01298037
Storage case for CA 5001 and CA 5003 analogue multimeters and CA 5011 digital-analogue multimeter
MN11 AC current clamp
P01120404
Current clamp 200A AC. Ø20mm clamping. Output signal : A AC. Transformer ratio : 1000/1. Output by cord and Ø4mm insulated male plugs. Output protected against overvoltage.
C100 AC current clamp
P01120301
Current clamp 1000A AC. Ø52mm cable gland. Output signal : A AC. Transformer ratio 1000/1. Output via Ø4mm insulated female sockets.
Alkaline battery(ies)
P01100620
9V rectangular battery, 6LR61, 6LF22, 1604A format, alkaline technology. Supplied individually.
Measurement and test accessory(ies)
P01102053Z
Set of 2 rigid crocodile clips (1 red / 1 black) / 20 A / 1000V CAT III
Measurement and test accessory(ies)
P01102055Z
Set of 2 wire picks (1 red and 1 black) for use at very low voltages (30 V AC, 60 V DC)
CMI214S U/I measurement adapter for 2P+T sockets
P03295509
Adapter lead for safe current measurement with an ammeter or current clamp without stripping the outer sheath of the power cable
MINI01 AC current clamp
P01105101Z
Current clamp 150A AC. Ø10mm insert. Output signal : A AC, Transformer ratio : 1000/1. Output via cord and Ø4mm insulated male plugs, protected against overvoltage.
Test and measurement leads
P01295461Z
Set of 2 IP2X multimeter leads (1 red, 1 black) / IP2X touch point - angled male plug D4 mm / 15 A / 1.5 m / IEC 61010 600V CAT IV
Test and measurement leads
P01295456Z
Set of 2 PVC touch point leads (1 red, 1 black) / Insulated Ø4mm angled male plug / 15A / 1.5 m / 1000V CAT IV
Measurement and test accessory(ies)
P01295457Z
Set of 2 alligator clips (1 red and 1 black) 15A for CAT III & IV 1000V installations
Measuring and testing accessories
P01295459Z
Accessory kit for electrician 2 moulded touch-points CAT IV, 2 moulded PVC cords (R/N) 1.5 m right male-male angled plug, 2 crocodile clips, 2 moulded touch-points D4 CAT II
Measuring and testing tip(s)
P01295454Z
Set of 2 moulded test probes (1 red / 1 black) for CAT III & IV 1000V installations
Measuring and test leads
P01295451Z
Set of 2 moulded PVC cables (1 red, 1 black) / Ø4mm insulated straight male plug - Ø4mm insulated angled male plug / 15A / 1.5 m / 1000V CAT IV
Test and measurement leads
P01295453Z
Set of 2 moulded silicone leads (1 red, 1 black) / Ø4mm insulated straight male plug - Ø4mm insulated angled male plug / 15A / 1.5 m / 1000V CAT IV
Measuring and test tip(s)
P01295458Z
Set of 2 4mm moulded touch-points (1 red and 1 black) for CAT 2 300V installations
Measuring and testing tip(s)
P01295460Z
Set of 2 moulded touch-points 2mm (1 red and 1 black) for CAT 2 installations 300V
Test and measurement leads
P01295455Z
Set of 2 PVC touch point leads (1 red, 1 black) / Ø4mm insulated straight male plug / 15A / 1.5 m / 1000V CAT IV
Measuring and testing tip(s)
P01295491Z
Ø2mm 1000V CAT IV 10A test probes. Suitable for IP2X contacts on modular switchboards. Ø4mm insulated female connector. Set of 2 (1 red/1 black). UL approved
CA 5011 multimeter with case
P01196311F
Spare fuse(s)
P01297038
Spare fuse 6x32, breaking capacity 10A, 500V, 10kA, HPC (supplied in quantities of 10)
Spare fuse(s)
P01297039
Spare fuse size 6x32, breaking capacity 1A, 500V, 10kA, HPC (supplied in quantities of 10)
Storage and transport bag
P01298033
Carrying case with strap for multimeter and multimeter clamp. Useful dimensions 225 x 270 x 70 mm
Storage and transport case
P01298036
Carrying case No5. For storing the luminaire and its cords. Usable dimensions 180 x 220 x 75 mm
Storage and transport case
P01298037
Storage case for CA 5001 and CA 5003 analogue multimeters and CA 5011 digital-analogue multimeter
MN11 AC current clamp
P01120404
Current clamp 200A AC. Ø20mm clamping. Output signal : A AC. Transformer ratio : 1000/1. Output by cord and Ø4mm insulated male plugs. Output protected against overvoltage.
C100 AC current clamp
P01120301
Current clamp 1000A AC. Ø52mm cable gland. Output signal : A AC. Transformer ratio 1000/1. Output via Ø4mm insulated female sockets.
Alkaline battery(ies)
P01100620
9V rectangular battery, 6LR61, 6LF22, 1604A format, alkaline technology. Supplied individually.
Measurement and test accessory(ies)
P01102053Z
Set of 2 rigid crocodile clips (1 red / 1 black) / 20 A / 1000V CAT III
Measurement and test accessory(ies)
P01102055Z
Set of 2 wire picks (1 red and 1 black) for use at very low voltages (30 V AC, 60 V DC)
CMI214S U/I measurement adapter for 2P+T sockets
P03295509
Adapter lead for safe current measurement with an ammeter or current clamp without stripping the outer sheath of the power cable
MINI01 AC current clamp
P01105101Z
Current clamp 150A AC. Ø10mm insert. Output signal : A AC, Transformer ratio : 1000/1. Output via cord and Ø4mm insulated male plugs, protected against overvoltage.
Test and measurement leads
P01295461Z
Set of 2 IP2X multimeter leads (1 red, 1 black) / IP2X touch point - angled male plug D4 mm / 15 A / 1.5 m / IEC 61010 600V CAT IV
Test and measurement leads
P01295456Z
Set of 2 PVC touch point leads (1 red, 1 black) / Insulated Ø4mm angled male plug / 15A / 1.5 m / 1000V CAT IV
Measurement and test accessory(ies)
P01295457Z
Set of 2 alligator clips (1 red and 1 black) 15A for CAT III & IV 1000V installations
Measuring and testing accessories
P01295459Z
Accessory kit for electrician 2 moulded touch-points CAT IV, 2 moulded PVC cords (R/N) 1.5 m right male-male angled plug, 2 crocodile clips, 2 moulded touch-points D4 CAT II
Measuring and testing tip(s)
P01295454Z
Set of 2 moulded test probes (1 red / 1 black) for CAT III & IV 1000V installations
Measuring and test leads
P01295451Z
Set of 2 moulded PVC cables (1 red, 1 black) / Ø4mm insulated straight male plug - Ø4mm insulated angled male plug / 15A / 1.5 m / 1000V CAT IV
Test and measurement leads
P01295453Z
Set of 2 moulded silicone leads (1 red, 1 black) / Ø4mm insulated straight male plug - Ø4mm insulated angled male plug / 15A / 1.5 m / 1000V CAT IV
Measuring and test tip(s)
P01295458Z
Set of 2 4mm moulded touch-points (1 red and 1 black) for CAT 2 300V installations
Measuring and testing tip(s)
P01295460Z
Set of 2 moulded touch-points 2mm (1 red and 1 black) for CAT 2 installations 300V
Test and measurement leads
P01295455Z
Set of 2 PVC touch point leads (1 red, 1 black) / Ø4mm insulated straight male plug / 15A / 1.5 m / 1000V CAT IV
Measuring and testing tip(s)
P01295491Z
Ø2mm 1000V CAT IV 10A test probes. Suitable for IP2X contacts on modular switchboards. Ø4mm insulated female connector. Set of 2 (1 red/1 black). UL approved
Add one or more products to your quote request in just a few clicks. Our teams will analyze your needs and get back to you quickly with a personalized offer tailored to your requirements.
Similar products
