France
Germany
Italy
Spain
MX1 Analogue multimeter
MX1 Analogue multimeter. Audible continuity with voltage presence indication. IP65 sealing, 600V CAT III
CA 5001 Analogue multimeter
CA 5001 Analogue multimeter
Analogue device
Guarantee
Product presentation
The CA 5005 is a very competitively priced analogue multimeter designed to meet all the needs of electricians.
It comes with a current clamp that allows direct measurement of alternating currents up to 200 A AC.
Features:
- DC voltage: 100 mV to 600 V (8 ranges)
- AC voltage: 10 V to 600 V (5 ranges)
- DC current: 50 µA to 10 A (6 ranges)
- AC current: 3 A to 240 A (5 ranges) with MN89 clamp supplied
- Automatic calibration
- "Voltest" indicator light if voltage is present in ohmmeter
- Typical accuracy: 1.5%
- Impedance: 20 kΩ/V
- Resistance: 10 kΩ and 1 MΩ
- Continuity sound test: R < 50 Ω
dB scale (AC voltages) - Fuse indicator
Dimensions: 160 x 105 x 56 mm - Weight: 500 g
- IP53
- Use on all installations rated CAT III 600 V or less in accordance with IEC/EN 61010-1 Edition 2
Analogue device
Guarantee
Need information about our solutions? Our experts are available to advise and assist you with your project. Contact a sales representative now for a detailed presentation and an offer tailored to your needs.
Features
DC Voltage
8 ranges: 100 mV / …; / 1000 V(2)
AC Voltage
5 ranges: 10 V / …; / 1000 V(2)
Internal Resistance
20 kΩ/V
Frequency of use
10 Hz …; 100 kHz depending on range
DC Current
6 ranges: 50 μ;A / …; / 10 A
AC Current
5 ranges: 3 A / …; / 300 A(3)
Resistance
2 ranges: 10 kΩ and 1 MΩ
Audible Continuity Test
R < 50 Ω
dB Scale for VAC
0 …; +22 dB
Typical Accuracy(4)
1.5% in Vdc
2.5% in Vac and Aac
10% in Ω
Power supply
1 battery 9 V 6LR61
Autonomy
10,000 measurements of 10 s
Electrical Safety(5)
IEC 61010-1 Edition 2 600 V CAT III
Protection(6)
HPC fuses 1 A and 10 A
Degree of Protection
IP 53
Climatic Conditions
−;10 °C …; +55 °C and RH < 90 %
Dimensions / Weight
160 x 105 x 56 mm / 500 g
Documentation and support
Do you have a question about using or installing your measurement equipment? Our support team is available to provide you with quick and effective solutions. Contact support for personalized assistance.
Language *
Do you have a question about using or installing your measurement equipment? Our support team is available to provide you with quick and effective solutions. Contact support for personalized assistance.
References and accessories
To fully meet your expectations, a range of accessories is available that is compatible with your equipment. Feel free to add them to your quote request to obtain a complete and tailored solution.
C.A 5005 Multimeter with MN89 in box
P01196523E
MN89 AC current clamp
P01120415
Current clamp 200A AC. Ø20mm insert. Output signal: V DC. Output/input ratio: 100 mV DC / A AC. Output by cord and Ø4mm insulated male plugs.
Spare fuse(s)
P01297038
Spare fuse 6x32, breaking capacity 10A, 500V, 10kA, HPC (supplied in quantities of 10)
Spare fuse(s)
P01297039
Spare fuse size 6x32, breaking capacity 1A, 500V, 10kA, HPC (supplied in quantities of 10)
Storage and transport bag
P01298033
Carrying case with strap for multimeter and multimeter clamp. Useful dimensions 225 x 270 x 70 mm
Storage and transport case
P01298036
Carrying case No5. For storing the luminaire and its cords. Usable dimensions 180 x 220 x 75 mm
Storage and transport case
P01298037A
Storage case for CA 5005 analogue multimeter and current clamp
Alkaline battery(ies)
P01100620
9V rectangular battery, 6LR61, 6LF22, 1604A format, alkaline technology. Supplied individually.
MINI09 AC current clamp
P01105109Z
Current clamp 150A AC. Ø10mm cable gland. Output signal : V DC. Output/input ratio: 100 mV DC / A AC. Output via cord and Ø4mm insulated male plugs.
Measurement and test accessory(ies)
P01102053Z
Set of 2 rigid crocodile clips (1 red / 1 black) / 20 A / 1000V CAT III
Measurement and test accessory(ies)
P01102055Z
Set of 2 wire picks (1 red and 1 black) for use at very low voltages (30 V AC, 60 V DC)
CMI214S U/I measurement adapter for 2P+T sockets
P03295509
Adapter lead for safe current measurement with an ammeter or current clamp without stripping the outer sheath of the power cable
Test and measurement leads
P01295461Z
Set of 2 IP2X multimeter leads (1 red, 1 black) / IP2X touch point - angled male plug D4 mm / 15 A / 1.5 m / IEC 61010 600V CAT IV
Test and measurement leads
P01295456Z
Set of 2 PVC touch point leads (1 red, 1 black) / Insulated Ø4mm angled male plug / 15A / 1.5 m / 1000V CAT IV
Measurement and test accessory(ies)
P01295457Z
Set of 2 alligator clips (1 red and 1 black) 15A for CAT III & IV 1000V installations
Measuring and testing accessories
P01295459Z
Accessory kit for electrician 2 moulded touch-points CAT IV, 2 moulded PVC cords (R/N) 1.5 m right male-male angled plug, 2 crocodile clips, 2 moulded touch-points D4 CAT II
Measuring and testing tip(s)
P01295454Z
Set of 2 moulded test probes (1 red / 1 black) for CAT III & IV 1000V installations
Measuring and test leads
P01295451Z
Set of 2 moulded PVC cables (1 red, 1 black) / Ø4mm insulated straight male plug - Ø4mm insulated angled male plug / 15A / 1.5 m / 1000V CAT IV
Test and measurement leads
P01295453Z
Set of 2 moulded silicone leads (1 red, 1 black) / Ø4mm insulated straight male plug - Ø4mm insulated angled male plug / 15A / 1.5 m / 1000V CAT IV
Measuring and test tip(s)
P01295458Z
Set of 2 4mm moulded touch-points (1 red and 1 black) for CAT 2 300V installations
Measuring and testing tip(s)
P01295460Z
Set of 2 moulded touch-points 2mm (1 red and 1 black) for CAT 2 installations 300V
Test and measurement leads
P01295455Z
Set of 2 PVC touch point leads (1 red, 1 black) / Ø4mm insulated straight male plug / 15A / 1.5 m / 1000V CAT IV
Measuring and testing tip(s)
P01295491Z
Ø2mm 1000V CAT IV 10A test probes. Suitable for IP2X contacts on modular switchboards. Ø4mm insulated female connector. Set of 2 (1 red/1 black). UL approved
CA 5005 Multimeter MN89 Clamp
P01196523F
MN89 AC current clamp
P01120415
Current clamp 200A AC. Ø20mm insert. Output signal: V DC. Output/input ratio: 100 mV DC / A AC. Output by cord and Ø4mm insulated male plugs.
Spare fuse(s)
P01297038
Spare fuse 6x32, breaking capacity 10A, 500V, 10kA, HPC (supplied in quantities of 10)
Spare fuse(s)
P01297039
Spare fuse size 6x32, breaking capacity 1A, 500V, 10kA, HPC (supplied in quantities of 10)
Storage and transport bag
P01298033
Carrying case with strap for multimeter and multimeter clamp. Useful dimensions 225 x 270 x 70 mm
Storage and transport case
P01298036
Carrying case No5. For storing the luminaire and its cords. Usable dimensions 180 x 220 x 75 mm
Storage and transport case
P01298037A
Storage case for CA 5005 analogue multimeter and current clamp
Alkaline battery(ies)
P01100620
9V rectangular battery, 6LR61, 6LF22, 1604A format, alkaline technology. Supplied individually.
MINI09 AC current clamp
P01105109Z
Current clamp 150A AC. Ø10mm cable gland. Output signal : V DC. Output/input ratio: 100 mV DC / A AC. Output via cord and Ø4mm insulated male plugs.
Measurement and test accessory(ies)
P01102053Z
Set of 2 rigid crocodile clips (1 red / 1 black) / 20 A / 1000V CAT III
Measurement and test accessory(ies)
P01102055Z
Set of 2 wire picks (1 red and 1 black) for use at very low voltages (30 V AC, 60 V DC)
CMI214S U/I measurement adapter for 2P+T sockets
P03295509
Adapter lead for safe current measurement with an ammeter or current clamp without stripping the outer sheath of the power cable
Test and measurement leads
P01295461Z
Set of 2 IP2X multimeter leads (1 red, 1 black) / IP2X touch point - angled male plug D4 mm / 15 A / 1.5 m / IEC 61010 600V CAT IV
Test and measurement leads
P01295456Z
Set of 2 PVC touch point leads (1 red, 1 black) / Insulated Ø4mm angled male plug / 15A / 1.5 m / 1000V CAT IV
Measurement and test accessory(ies)
P01295457Z
Set of 2 alligator clips (1 red and 1 black) 15A for CAT III & IV 1000V installations
Measuring and testing accessories
P01295459Z
Accessory kit for electrician 2 moulded touch-points CAT IV, 2 moulded PVC cords (R/N) 1.5 m right male-male angled plug, 2 crocodile clips, 2 moulded touch-points D4 CAT II
Measuring and testing tip(s)
P01295454Z
Set of 2 moulded test probes (1 red / 1 black) for CAT III & IV 1000V installations
Measuring and test leads
P01295451Z
Set of 2 moulded PVC cables (1 red, 1 black) / Ø4mm insulated straight male plug - Ø4mm insulated angled male plug / 15A / 1.5 m / 1000V CAT IV
Test and measurement leads
P01295453Z
Set of 2 moulded silicone leads (1 red, 1 black) / Ø4mm insulated straight male plug - Ø4mm insulated angled male plug / 15A / 1.5 m / 1000V CAT IV
Measuring and test tip(s)
P01295458Z
Set of 2 4mm moulded touch-points (1 red and 1 black) for CAT 2 300V installations
Measuring and testing tip(s)
P01295460Z
Set of 2 moulded touch-points 2mm (1 red and 1 black) for CAT 2 installations 300V
Test and measurement leads
P01295455Z
Set of 2 PVC touch point leads (1 red, 1 black) / Ø4mm insulated straight male plug / 15A / 1.5 m / 1000V CAT IV
Measuring and testing tip(s)
P01295491Z
Ø2mm 1000V CAT IV 10A test probes. Suitable for IP2X contacts on modular switchboards. Ø4mm insulated female connector. Set of 2 (1 red/1 black). UL approved
Add one or more products to your quote request in just a few clicks. Our teams will analyze your needs and get back to you quickly with a personalized offer tailored to your requirements.
Similar products
