China
Finland
France
Germany
Italy
Netherlands
Poland
Portugal
Romania
Spain
Sweden
TK2002 Thermometer + 2 wired probes
IP65 digital thermometer, 2 K thermocouple channels for temperature measurement from -50 °C to 1,000 °C.
CA 1823 1-channel thermometer for resistive probes
CA 1823 1-channel thermometer for resistive probes
ANDROID communication mode
Communication mode
Protection class
USB communication mode
Product presentation
Compact and magnetized for fixed or portable use, the CA 1823 resistance thermometer is an accurate, versatile, long-lasting thermometer. Equipped with a wide backlit display, it offers all the useful functions for work in the field, such as Min, Max, Hold, as well as spot or programmable recording possibilities. Communicating via USB or Bluetooth, it is possible to program alarms and recording triggers on thresholds by means of the Data Logger Transfer software.
ANDROID communication mode
Communication mode
Protection class
USB communication mode
Need information about our solutions? Our experts are available to advise and assist you with your project. Contact a sales representative now for a detailed presentation and an offer tailored to your needs.
Highlights
- Compact and magnetic for fixed or portable use
- Large backlit display
- Records up to 1 million points
- Communicates via USB or Bluetooth
- Alarms and alarm-triggered recording
- Up to 3 years ofbattery life
- IP54 housing
- Data Logger Transfer software with automatic report generation
Features
Metrological characteristics
Sensor
Pt100, Pt 1000 probe
Number of inputs
1
Range
-100 to +400 °C -148 to +752 °F
Resolution
Display in °C: 0.1°C Display in °F: 0.1°F
Accuracy
± (0.4 % L +0.3 °C)
Features
Functions
Min., Max., HOLD, Alarms
Recording
Manual trigger and stop on the product Scheduled recording
Alarms
Visual alert on threshold exceedance configurable via Data Logger Transfer Recording can be triggered on alarm threshold
Memory
Greater than 1 million points
Autonomy
800 h (portable mode) / 3 years in recording (measurement base 15 minutes)
Physical characteristics
Power supply
- Alkaline batteries: 3 x 1.5V LR6 or rechargeable NiMH battery - Mains connection via power adapter / micro USB (optional)
Dimensions/Weight
150 x 72 x 32 mm / 260 g with batteries
Protection index
IP54 enclosure
Operating Temperature / Humidity
-10 to +60 °C - 10 to 90 % RH
Compliance
Standards
IEC 61010-1 for voltages of 50 V in category II - IEC 61326-1
Documentation and support
Do you have a question about using or installing your measurement equipment? Our support team is available to provide you with quick and effective solutions. Contact support for personalized assistance.
Language *
Do you have a question about using or installing your measurement equipment? Our support team is available to provide you with quick and effective solutions. Contact support for personalized assistance.
Application for:
- remotely viewing real-time measurements,
- viewing measurement trends over time,
- displaying recorded data and exporting it as .xls or .txt files,
- configuring products,
- configuring recordings.
Multilingual.
Compatible with CA 1821, CA 1822, CA 1823, CA 1246, CA 1227, and CA 1110 running embedded software version 2.0 or higher.
Link: https://play.google.com/store/apps/details?id=connection.ble.com&hl=en
Allows you to install the latest version of the Bluetooth module in the device.
CAUTION : The firmware version v4.28 must be installed on the device before this update.
In order to update the Bluetooth module, you have to follow the procedure as below :
- Download and unzip the file bt122_xxxx.zip and copy BT122_xxxx.bin into the device.
- Switch on the device and press Bluetooth button.
- Wait for one minute for the PASS/FAIL message.
- If PASS message appeared, the file BT122_xxxx.bin will be renamed as BT122_FW.bin and will have to remain on the device.
- The Bluetooth module is updated.
To update your product, please first check your firmware version by holding down the following two buttons: the centre button and the MEM/REC button.
If your product has a 4.xx version, please download the 4.xx firmware.
To update your product:
- Once you have downloaded the .bin file from our website that matches your product’s model number, hold down the MEM button and then switch on the device by pressing the ON/OFF button. The device will display ‘BOOT’.
- Release the buttons and the device will display ‘COPY’, indicating that it is ready to receive the new firmware.
- Connect the device to your PC using the USB cable supplied.
- Copy the .bin file onto the device, as you would with a USB stick.
- Once the copy is complete, press the MEM button and the device will display ‘LOAD’, indicating that the firmware is being installed.
- When the installation is complete, the device will display ‘PASS’ or ‘FAIL’ depending on whether it was successful or not. If it fails, download the firmware again and repeat the procedure.
- The device will then restart normally.
PLEASE NOTE: After updating the firmware, you will need to update the Bluetooth module.
To update your product, please first check your firmware version by holding down the following two buttons: the centre button and the MEM/REC button.
If your product has a 4.xx version, please download the 4.xx firmware.
To update your product:
- Once you have downloaded the .bin file from our website that matches your product’s model number, hold down the MEM button and then switch on the device by pressing the ON/OFF button. The device will display ‘BOOT’.
- Release the buttons and the device will display ‘COPY’, indicating that it is ready to receive the new firmware.
- Connect the device to your PC using the USB cable supplied.
- Copy the .bin file onto the device, as you would with a USB stick.
- Once the copy is complete, press the MEM button and the device will display ‘LOAD’, indicating that the firmware is being installed.
- When the installation is complete, the device will display ‘PASS’ or ‘FAIL’ depending on whether it was successful or not. If it fails, download the firmware again and repeat the procedure.
- The device will then restart normally.
PLEASE NOTE: After updating the firmware, you will need to update the Bluetooth module.
The Data Logger Transfer software allows you to control your data loggers.
The Data Logger Transfer software is a tool that enables you to:
- Configure the devices,
- Download and view data stored in memory,
- Take instant readings,
- Display data in the form of tables or graphs,
- Generate automatic reports in Word .docx format,
- Export this measurement data to DataView (*.dvb files) or to a spreadsheet.
Compatible with Windows 7, 8, 8.1, 10 and 11
Please note: DataView is not supplied with the Data Logger Transfer software
Do you have a question about using or installing your measurement equipment? Our support team is available to provide you with quick and effective solutions. Contact support for personalized assistance.
References and accessories
To fully meet your expectations, a range of accessories is available that is compatible with your equipment. Feel free to add them to your quote request to obtain a complete and tailored solution.
CA 1823 1-channel thermometer for resistive probes
P01654823
SP10 Spring-loaded Pt100 probe for surface measurement
P03652712
SP10 Pt100 spring probe for surface measurements up to 200°C, with handle, 13 cm long and 5 mm in diameter.
SP11 Pt100 needle penetration probe
P03652713
SP11 Pt100 needle probe for penetration measurements up to 600°C, with handle, 13 cm long and 3 mm in diameter.
SP 12 Probe
P03652714
SP13 Pt100 probe for liquid measurement
P03652715
SP13 Pt100 type probe for immersion measurement in liquids up to 600°C. Probe length 13 cm and diameter 3 mm.
Shock-proof sheath + Multifix for climatic range
P01654252
Shock-proof sheath for products in the CA 1110, CA 1227, CA 1246, CA 1550, CA 1821, CA 1822, CA 1823 climatic & environmental range. Protective sleeve supplied with Multifix adapter.
MultiFix Mounting accessory
P01102100Z
Magnetic, articulated fixing accessory for MultiFix-compatible measuring instruments, cases and bags. Can be transported and fixed for greater ease of use.
Mains adapter and µUSB-B cable
P01651023
110V-240V 50/60Hz female USB type A power adapter supplied with male USB type A/ male USB type microB cable.
MTX328x battery charger
HX0053
Storage and transport bag
P01298075
Bag with inside pocket, hand strap and MultiFix accessory. Useful interior dimensions 120 x 245 x 60 mm
Storage and transport case
P01298071
Metal case, fitted with a set of foam pads. Supplied with strap and keys. Useful internal dimensions 270x195x65 mm
DataView Software
P01102095
PC software for configuring, saving and processing data, editing reports, etc. for Chauvin Arnoux measuring instruments
Bluetooth 4.0 BLE dongle in USB stick format
P01654253
Bluetooth 4.0 BLE dongle in USB key format for equipping a PC with a Bluetooth interface.
PROBE SP14 450°C L20cm 0,3mm CLASS A
P01655020
Add one or more products to your quote request in just a few clicks. Our teams will analyze your needs and get back to you quickly with a personalized offer tailored to your requirements.
Similar products
