China
Finland
France
Germany
Italy
Netherlands
Poland
Portugal
Romania
Spain
Sweden
DL 53 Temperature and humidity data logger
Compact temperature and humidity data logger with 32,000-point memory and alarm functions.
CA 1550 Micromanometer
CA 1550 Micromanometer
ANDROID communication mode
Communication mode
USB communication mode
Product presentation
The CA 1550 micromanometer can be used to check the operation of ventilation and air-conditioning installations, etc. It offers the following measurements:
• Differential pressure management to check installations
• Air-speed measurement in ducts with the Pitot tube
• Measurement of air pressure on air extraction outlets on pressure-reducing orifices
• Measurement on pressure-reducing orifices
• Measurement of filter choking on air handling units To optimize measurement accuracy, the CA 1550 is equipped with an atmospheric pressure or temperature compensation function.
This compact, ergonomic instrument can be used in various ways: handheld, fixed magnetically to a metal panel, suspended, placed on a flat surface or hooked by means of the Multifix accessory. Thanks to its communication functions, it can be connected via USB to a PC with the Data Logger Transfer software, making it possible to process the data, configure the instrument and generate reports in Word format. The CA 1550 can also communicate via Bluetooth with an ANDROID smartphone by means of the dedicated application.
ANDROID communication mode
Communication mode
USB communication mode
Need information about our solutions? Our experts are available to advise and assist you with your project. Contact a sales representative now for a detailed presentation and an offer tailored to your needs.
Highlights
- Differential air pressure, air speed and air flow rate
- Manual or automatic temperature compensation
- Atmospheric pressure compensation
- MAP mode
- Min, Max, Average & Hold modes
- Recording of snapshots or continuous recording up to 1 million points
- Magnetized product compatible with the Multifix accessory
Features
Metrological characteristics
Differential pressure measurement range
- 2 450 to + 2 450 Pa
Differential pressure resolution
0.1 Pa for measurements below 200 Pa and 1 Pa above that
Differential pressure accuracy
± 0,5 % full scale ± 1 pt
Range Speed & Air Flow (with Pitot tube accessory)
de 2 m/s à 60 m/s
de 0,00 à 9 999 m3/h
Compensations
Manual or automatic temperature compensation (K thermocouple input)
Automatic compensation for atmospheric pressure
Features
Functions
Differential measurements, atmospheric pressure measurement, Min., Max., Average, HOLD, Auto-zero, MAP mode for multi-point averaging.
Recording
Manual start and stop on the product or programmed
Memory
Over 1 million points
Units
Pressure measurement units: Pa, PSI, DaPa, hPa, mbar, mmHg, inHg, mmH2O, inH2O - Air velocity units: m/s, km/h, fpm, mph, Air flow units: m3 /s, m3 /h, l/s or cfm - Temperature : °C, °F
Physical characteristics
Dimensions
150 x 72 x 32 mm
Weight
260 g
Documentation and support
Do you have a question about using or installing your measurement equipment? Our support team is available to provide you with quick and effective solutions. Contact support for personalized assistance.
Allows you to install the latest version of the Bluetooth module in the device.
CAUTION : The firmware version v4.28 must be installed on the device before this update.
In order to update the Bluetooth module, you have to follow the procedure as below :
- Download and unzip the file bt122_xxxx.zip and copy BT122_xxxx.bin into the device.
- Switch on the device and press Bluetooth button.
- Wait for one minute for the PASS/FAIL message.
- If PASS message appeared, the file BT122_xxxx.bin will be renamed as BT122_FW.bin and will have to remain on the device.
- The Bluetooth module is updated.
To update your product, please first check your firmware version by holding down the following two buttons: the centre button and the MEM/REC button.
If your product has a 4.xx version, please download the 4.xx firmware.
To update your product:
- Once you have downloaded the .bin file from our website that matches your product’s model number, hold down the MEM button and then switch on the device by pressing the ON/OFF button. The device will display ‘BOOT’.
- Release the buttons and the device will display ‘COPY’, indicating that it is ready to receive the new firmware.
- Connect the device to your PC using the USB cable supplied.
- Copy the .bin file onto the device, as you would with a USB stick.
- Once the copy is complete, press the MEM button and the device will display ‘LOAD’, indicating that the firmware is being installed.
- When the installation is complete, the device will display ‘PASS’ or ‘FAIL’ depending on whether it was successful or not. If it fails, download the firmware again and repeat the procedure.
- The device will then restart normally.
PLEASE NOTE: After updating the firmware, you will need to update the Bluetooth module.
To update your product, please first check your firmware version by holding down the following two buttons: the centre button and the MEM/REC button.
If your product has a 4.xx version, please download the 4.xx firmware.
To update your product:
- Once you have downloaded the .bin file from our website that matches your product’s model number, hold down the MEM button and then switch on the device by pressing the ON/OFF button. The device will display ‘BOOT’.
- Release the buttons and the device will display ‘COPY’, indicating that it is ready to receive the new firmware.
- Connect the device to your PC using the USB cable supplied.
- Copy the .bin file onto the device, as you would with a USB stick.
- Once the copy is complete, press the MEM button and the device will display ‘LOAD’, indicating that the firmware is being installed.
- When the installation is complete, the device will display ‘PASS’ or ‘FAIL’ depending on whether it was successful or not. If it fails, download the firmware again and repeat the procedure.
- The device will then restart normally.
PLEASE NOTE: After updating the firmware, you will need to update the Bluetooth module.
The Data Logger Transfer software allows you to control your data loggers.
The Data Logger Transfer software is a tool that enables you to:
- Configure the devices,
- Download and view data stored in memory,
- Take instant readings,
- Display data in the form of tables or graphs,
- Generate automatic reports in Word .docx format,
- Export this measurement data to DataView (*.dvb files) or to a spreadsheet.
Compatible with Windows 7, 8, 8.1, 10 and 11
Please note: DataView is not supplied with the Data Logger Transfer software
Do you have a question about using or installing your measurement equipment? Our support team is available to provide you with quick and effective solutions. Contact support for personalized assistance.
References and accessories
To fully meet your expectations, a range of accessories is available that is compatible with your equipment. Feel free to add them to your quote request to obtain a complete and tailored solution.
CA 1550 Micromanometer
P01654550
Pitot tube
P01654560
324 mm stainless steel pitot tube for air velocity measurement in conjunction with CA 1550 differential micromanometer.
2-meter transparent tube (internal Ø 5 mm)
P01654561
Transparent tube with internal diameter of 5 mm and length of 2 metres for CA 1550 micromanometer.
Shock-proof sheath + Multifix for climatic range
P01654252
Shock-proof sheath for products in the CA 1110, CA 1227, CA 1246, CA 1550, CA 1821, CA 1822, CA 1823 climatic & environmental range. Protective sleeve supplied with Multifix adapter.
MultiFix Mounting accessory
P01102100Z
Magnetic, articulated fixing accessory for MultiFix-compatible measuring instruments, cases and bags. Can be transported and fixed for greater ease of use.
Mains adapter and µUSB-B cable
P01651023
110V-240V 50/60Hz female USB type A power adapter supplied with male USB type A/ male USB type microB cable.
Storage and transport bag
P01298075
Bag with inside pocket, hand strap and MultiFix accessory. Useful interior dimensions 120 x 245 x 60 mm
MTX328x battery charger
HX0053
Bluetooth 4.0 BLE dongle in USB stick format
P01654253
Bluetooth 4.0 BLE dongle in USB key format for equipping a PC with a Bluetooth interface.
DataView Software
P01102095
PC software for configuring, saving and processing data, editing reports, etc. for Chauvin Arnoux measuring instruments
SK6 Probe thermocouple K flexible
P03652906
SK6 flexible K thermocouple probe for measurements up to 285°C. Probe 1 metre long and 1 mm in diameter.
CA 1550 Micromanometer & Pitot tube
P01654555
Recording micromanometer supplied with Pitot tube in hard case for measuring differential pressure, temperature, speed and air flow.
Add one or more products to your quote request in just a few clicks. Our teams will analyze your needs and get back to you quickly with a personalized offer tailored to your requirements.
Similar products
