CA 1110 Luxmeter

Choose my reference

Product presentation Highlights References and accessories

ANDROID communication mode

Communication mode

USB communication mode

Product presentation

The CA 1110 luxmeter (light meter) measures the illuminance of all light sources (LED, Fluo. etc.) up to 200,000 lux in compliance with Class C of the NF C 42-710 standard. With the MAP function, you can produce a map of a surface or room in order to check that the illuminance is uniform. Because it is magnetic, the sensor can be fixed to the product for one-handed use or for easy transport, but it is also possible to use it remotely to avoid shading by the operator. The CA 1110 also offers Min, Max, Average and Hold functions, as well as allowing spot or programmable recording. The Data Logger Transfer software is available for free download to view the recorded data, configure the CA 1110, benefit from remote display and generate automatic reports.

Click here to download the ANDROID application

ANDROID communication mode

Communication mode

USB communication mode

Need information about our solutions? Our experts are available to advise and assist you with your project. Contact a sales representative now for a detailed presentation and an offer tailored to your needs.

Contact a sales representative

Highlights

Spectral error compensation on LED or fluorescent light sources
MAP function for mapping illuminance on a surface or in a room
C.I.E. spectral correction and incidence correction
Large backlit display
Remote sensor limiting the risk of the sensor being shaded by the operator or integrated into the product for one-handed use
Records up to 1 million points
Communicates via USB or Bluetooth with the “CA Environmental Logger” Android app
Data Logger Transfer software with automatic report generation

Features

Metrological characteristics

Measurement range

0.1 to 200,000 lx 0.01 to 18,580 fc

Standard mode accuracy

Incandescent lamp

± 3 % reading

LED

± 6 % of the reading (3000 K and 6000 K)

Fluorescent lamps

± 9 % of the reading

Compensation mode accuracy

LED mode

± 4 % of the reading (at 4000 K)

Fluorescent mode

± 4 % of the reading (type F11, 4000 K)

Features

Functions

Min., Max., HOLD, Average

Recording

Manual trigger and stop on the product Scheduled recording

MAP mode

The MAP function allows you to create a mapping of the illumination on a surface or in a room. The illumination measurements are thus saved in the same file.

Memory

Greater than 1 million points

Physical characteristics

Power supply

- Alkaline batteries: 3 x 1.5V LR6 or rechargeable NiMH battery - Mains connection via the power adapter / micro USB (optional)

Autonomy

500 h (portable mode) / 3 years in recording (measurement base 15 minutes)

Dimensions

Housing: 150 x 72 x 32 mm Sensor: 67 x 64 x 35 mm (with protective cover) Spiral cable: 24 to 120 cm

Weight

345 g with batteries

Protection index

Housing IP50

Operating temperature / Humidity

-10 to +60 ° C - 10 to 90 % RH

Compliance

Standards

Class C according to standard NF C 42-710

Documentation and support

Operating manuals Commercial documentation Software and support

Language *

CA 6611 - CA 6612

Do you have a question about using or installing your measurement equipment? Our support team is available to provide you with quick and effective solutions. Contact support for personalized assistance.

Contact support

Language *

CA 1110

AUDIT ENERGETIQUE

Contact support

Application for:

remotely viewing real-time measurements,
viewing measurement trends over time,
displaying recorded data and exporting it as .xls or .txt files,
configuring products,
configuring recordings.

Multilingual.

Compatible with CA 1821, CA 1822, CA 1823, CA 1246, CA 1227, and CA 1110 running embedded software version 2.0 or higher.

Link: https://play.google.com/store/apps/details?id=connection.ble.com&hl=en

Allows you to install the latest version of the Bluetooth module in the device.

CAUTION : The firmware version v4.28 must be installed on the device before this update.

In order to update the Bluetooth module, you have to follow the procedure as below :

- Download and unzip the file bt122_xxxx.zip and copy BT122_xxxx.bin into the device.

- Switch on the device and press Bluetooth button.

- Wait for one minute for the PASS/FAIL message.

- If PASS message appeared, the file BT122_xxxx.bin will be renamed as BT122_FW.bin and will have to remain on the device.

- The Bluetooth module is updated.

bt122_ca1110.zip

Mise à jour 21/10/2025

To update your product, please first check your firmware version by holding down the following two buttons: the centre button and the MEM/REC button.

If your product has a 4.xx version, please download the 4.xx firmware.

To update your product:

Once you have downloaded the .bin file from our website that matches your product’s model number, hold down the MEM button and then switch on the device by pressing the ON/OFF button. The device will display ‘BOOT’.
Release the buttons and the device will display ‘COPY’, indicating that it is ready to receive the new firmware.
Connect the device to your PC using the USB cable supplied.
Copy the .bin file onto the device, as you would with a USB stick.
Once the copy is complete, press the MEM button and the device will display ‘LOAD’, indicating that the firmware is being installed.
When the installation is complete, the device will display ‘PASS’ or ‘FAIL’ depending on whether it was successful or not. If it fails, download the firmware again and repeat the procedure.
The device will then restart normally.

PLEASE NOTE: After updating the firmware, you will need to update the Bluetooth module.

ca1110_firmware_v2.00_0.zip