France
Germany
Italy
Spain
Sweden
United Kingdom
P310 Benchtop pH meter
Digital benchtop pH meter with RS232 and analogue output. Measures pH, redox potential and temperature. Mains powered.
CA 10141 Portable conductivity meter
CA 10141 Portable conductivity meter
Protection class
Product presentation
The CA 10141 is ideal for inspections and routine measurements of conductivity, TDS (Total Dissolved Solids),
salinity, resistivity and temperature. Its numerous applications range from checking the threshold values for
drinking water to the treatment of wastewater, whether in the field, in the lab or for the process.
The CA 10141 is also used for measurements on natural waters thanks to its preset non-linear temperature
compensation function compliant with the ISO/DIN 7888 standard.
Protection class
Need information about our solutions? Our experts are available to advise and assist you with your project. Contact a sales representative now for a detailed presentation and an offer tailored to your needs.
Highlights
- Conductivity/TDS/resistivity/salinity/temperature
- All-terrain instrument: rugged and totally watertight
- Signal stability indicator for reproducible measurements
- Particularly comfortable to read thanks to its extra-wide backlit LCD screen
- Manual or automatic storage of more than 100,000 time/date-stamped measurements (PC software included)
Features
Conductivity
Measurement range (device only)
0.050 µS/cm to 500.0 mS/cm
Resolution (R)
0.001 to 0.1 (depending on the range)
Intrinsic uncertainty (device only)
± 0.5% ± R
TDS
Measurement range (device only)
0.001 mg/l to 499.9 g/l
Resolution (R)
0.001 to 0.1 (depending on the range)
Intrinsic uncertainty (device only)
± 0.5% ± R
Resistivity
Measurement range (device only)
2.000 Ω.cm to 19.99 MΩ.cm
Resolution (R)
0.001 to 0.01 (depending on the range)
Intrinsic uncertainty (device only)
± 0.5% ± R
Salinity
Measurement range (device only)
2.0 to 42.0 psu
Resolution (R)
0.1
Intrinsic uncertainty (device only)
± 0.5% ± R
Temperature
Measurement range (device only)
-10 to +120°C (14 to 248°F)
Available reference temperature
20/25 °C (68/77°F)
Calibration
1 point, 6 predefined conductivity standards (modifiable by the user); Possible return to a default calibration
Temperature compensation
Temperature compensation mode
Automatic (ATC) or manual (MTC) linear, nonlinear
Conductivity sensor
Type
XCP4ST1 (supplied), 4-pole conductivity sensor with integrated temperature probe (Pt 1000)
Connector
DIN 8 pins, 1 m cable
Data storage
Date and time
Yes
Memory
> 100,000 measurements
Sensor input
DIN 8 pins (adapters for BNC, S7 and Jack optional)
Communication interface
Micro-USB type B (USB device) 12 Mbit/s
Batteries
Number - Type
4 alkaline 1.5 V AA or LR06 batteries
Lifetime
Approximately 300 hours of continuous use
Auto-off
After 3, 10 or 15 min of non-use (adjustable)
Environmental conditions
Storage range (without batteries)
-20 to 70 °C
Usage range Protection index
-10 to +55 °C IP67
Dimensions (with the sleeve)
211 x 127 x 54 mm
Weight (without sensor)
600 g
Warranty (device only)
2 years
Documentation and support
Do you have a question about using or installing your measurement equipment? Our support team is available to provide you with quick and effective solutions. Contact support for personalized assistance.
Do you have a question about using or installing your measurement equipment? Our support team is available to provide you with quick and effective solutions. Contact support for personalized assistance.
To update your product:
- Once you have downloaded the .bin file from our website, hold down the MEM button and then switch on the device by pressing the ON/OFF button. The device will display ‘BOOT’.
- Release the buttons and the device will display ‘COPY’, indicating that it is ready to receive the new software.
- Connect the device to your PC using the USB cable supplied.
- Copy the .bin file onto the device, as you would with a USB stick.
- Once the copy is complete, press the MEM button and the device will display ‘LOAD’, indicating that the software is being installed.
- When the installation is complete, the device will display ‘PASS’ or ‘FAIL’ depending on whether it was successful or not. If it fails, download the software again and repeat the procedure.
- The device will then restart normally.
Safety datasheets buffers and maintenance solutions
-------------------------------------------------------------------------------------------
english
Buffer pH 4.005 Certified reference material
Buffer pH 6.865 Certified reference material
Buffer pH 9.180 Certified reference material
Conductivity standard 12.85mS/cm
Concentrated conductivity standard 12.88mS/cm KCl1M
Conductivity standard 147µS/cm
Conductivity standard 1408µS/cm
Concentrated ORP buffer 146 mV (Michaelis Solution)
Electrode filling solution KCl 1 mol/L
Please find the set.csv file for the CA 10141 conductivity meter in case it has been modified or lost.Be sure not to change the name of the set.csv file so that it is recognized by the device.
The Data Logger Transfer software allows you to control your data loggers.
The Data Logger Transfer software is a tool that enables you to:
- Configure the devices,
- Download and view data stored in memory,
- Take instant readings,
- Display data in the form of tables or graphs,
- Generate automatic reports in Word .docx format,
- Export this measurement data to DataView (*.dvb files) or to a spreadsheet.
Compatible with Windows 7, 8, 8.1, 10 and 11
Please note: DataView is not supplied with the Data Logger Transfer software
Do you have a question about using or installing your measurement equipment? Our support team is available to provide you with quick and effective solutions. Contact support for personalized assistance.
References and accessories
To fully meet your expectations, a range of accessories is available that is compatible with your equipment. Feel free to add them to your quote request to obtain a complete and tailored solution.
CA 10141 Portable conductivity meter
P01710020
Portable, waterproof IP67 conductivity meter for general use. For Cond/TDS/Sal/Rés/T measurements. Supplied in case with electrode and standard solutions.
XCP4ST1 Conductivity/T cell
P01710053
Conductivity/T cell, general field and laboratory use, for CA 10141.
Shock-proof sheath
P01710050
Shock-proof sheath for CA 10101, CA 10141, CA 10101E and CA 10141E.
DIN male-BNC/JACK female adapter
P01710054
DIN 8-pin adapter to BNC (conductivity cell) and Jack (temperature sensor). For CA 10141 conductivity meter.
DIN male-S7/JACK female adapter
P01710055
Adapter with DIN 8-pin connector to S7 (conductivity cell) and Jack (temperature sensor). For CA 10141 conductivity meter.
Adjustment kit
P01710060
Adjustment kit for CA 10101, CA 10141, CA 10101E and CA 10141E.
Standard 0.147 mS/cm 125 mL bottle
P01700117
Conductivity standard 147 µS/cm. Packaged in a 125 mL ready-to-use bottle.
NIST conductivity standard 1408 µS/cm
P01700118
Conductivity standard 1408 µS/cm. Packaged in a 125 mL ready-to-use bottle.
Standard 12.85 mS/cm bottle125 mL
P01700119
Conductivity standard 12.85 mS/cm. Packaged in a 125 mL ready-to-use bottle.
Standard KCL 1M bottle 125 mL
P01700116
Concentrated conductivity standard KCl 1 mol/L to be diluted to the 10th in pure water to obtain a solution of 12.88 mS/cm (25°C). Packaged in a 125 mL bottle.
Set of three beakers
P01710056
Set of three plastic beakers.
BT6 Pt1000 temperature sensor
P01710070
Pt1000 temperature sensor, stainless steel body, jack connector.
Add one or more products to your quote request in just a few clicks. Our teams will analyze your needs and get back to you quickly with a personalized offer tailored to your requirements.
Similar products
