France
Italy
Spain
United Kingdom
Finland
Sweden
Flexible current probes AmpFlex MA200 series
Flexible insulated 300A AC/450A peak current probe for oscilloscope. BP 1 MHz. Output via coaxial lead and insulated BNC male plug.
AmpFlex A130 series 3-phase current transducers
AmpFlex A130 series 3-phase current transducers
Electrical safety
Protection class
Product presentation
The AmpFlex A130 is a flexible current transducer with 3 measurement loops.
It can be connected directly to a power analyser, recorder, etc. to measure three-phase currents or up to 3 independent current measurements.
The main advantages of these flexible toroids are:
- Flexibility and lightness, enabling one or more conductors to be clamped, whatever their form (cable, bar, stranded wire, etc.). )
- A wide measurement range
- A bandwidth suitable for industrial frequencies and harmonic analysis
- No saturation effect and therefore no heating
- A constant, low phase shift suitable for wattmetric measurements
Main features:
- Measurement range: from 0. 5 A, up to 3 kA
- 3 ratings
- Sensor length (clamping Ø): 80 cm (Ø25 cm)
- Sensor/enclosure protection rating: IP67 / IP54
- Output signal: AC voltage
- Output via 3 coaxial leads terminated with an isolated safety BNC plug
- Power supply: 2 x 1. 5V AA or external µUSB type B 5V
- Autonomy with batteries: 500 hours
- 1000V CAT IV
Electrical safety
Protection class
Need information about our solutions? Our experts are available to advise and assist you with your project. Contact a sales representative now for a detailed presentation and an offer tailored to your needs.
Highlights
- Flexible three-phase current sensors
- IP67, 1000 V CAT IV
- Measurements from 0.5 A to 3 kA
- Autonomy with batteries: 500 hours
Documentation and support
Language *
Do you have a question about using or installing your measurement equipment? Our support team is available to provide you with quick and effective solutions. Contact support for personalized assistance.
Do you have a question about using or installing your measurement equipment? Our support team is available to provide you with quick and effective solutions. Contact support for personalized assistance.
References and accessories
To fully meet your expectations, a range of accessories is available that is compatible with your equipment. Feel free to add them to your quote request to obtain a complete and tailored solution.
A130 AmpFlex
P01120633
Flexible three-phase current sensors. 30-300-3kA/3V. Length 80 cm. Output via 3 coaxial leads and insulated BNC male plugs. Supplied with BNC/Banana adaptors.
Mains adapter and µUSB-B cable
P01651023
110V-240V 50/60Hz female USB type A power adapter supplied with male USB type A/ male USB type microB cable.
Alkaline battery(ies)
P01296033
1.5V cylindrical battery, LR6, AA, RC6 format, alkaline technology, supplied individually
Storage and transport accessory
P01102113
Set of 5 Velcro® straps, usable length 180 mm, width 15 mm, for storing cords, flexible sensors, etc.
Configuration accessory
P01102080
Set of plastic pins and rings in 12 colours to identify leads, current sensors and device inputs
BNC-Banana adapters
P01102101Z
Set of 2 insulated female BNC plug to insulated male RD/BK plug adapters D4mm at 19mm centres / 600V CAT III
Spare for AmpFlex A100
P01101924
Replacement fin for AmpFlex A100 connector, black, pack of 10 pcs.
Add one or more products to your quote request in just a few clicks. Our teams will analyze your needs and get back to you quickly with a personalized offer tailored to your requirements.
Similar products
