France
Germany
Italy
Spain
AC current clamps YxN series
Current clamps for measuring AC currents up to 500 AC on bars or conductors with a maximum diameter of 30 mm
AC current clamps MN series
AC current clamps MN series
Electrical safety
Electrical safety
Product presentation
The "MN" series is a range of versatile transformer clamps
for measuring alternating currents up to 240 A.
Compact and ergonomic, the jaw is suitable for measurements where access is difficult, and can also be used to hook any cable up to 20 mm in diameter in installations up to CAT III 600 or CAT IV 300V.
Model MN60: for oscilloscope
Model MN73 : for measurement at the output of an I.T.
Model MN73 : for leakage current measurement
Main features:
- Rated current: 240 A AC.
- Output signal(*): alternating current or alternating voltage
alternating, - Engagement diameter: 20 mm
- Output via cord and Ø4mm insulated male plugs
- 600 V CAT III / 300 V CAT IV
Electrical safety
Electrical safety
Need information about our solutions? Our experts are available to advise and assist you with your project. Contact a sales representative now for a detailed presentation and an offer tailored to your needs.
Highlights
17 models
Cord or socket output
Documentation and support
Do you have a question about using or installing your measurement equipment? Our support team is available to provide you with quick and effective solutions. Contact support for personalized assistance.
Do you have a question about using or installing your measurement equipment? Our support team is available to provide you with quick and effective solutions. Contact support for personalized assistance.
References and accessories
To fully meet your expectations, a range of accessories is available that is compatible with your equipment. Feel free to add them to your quote request to obtain a complete and tailored solution.
MN89 AC current clamp
P01120415
Current clamp 200A AC. Ø20mm insert. Output signal: V DC. Output/input ratio: 100 mV DC / A AC. Output by cord and Ø4mm insulated male plugs.
MN14 AC current clamp
P01120416
Current clamp 200A AC. Ø20mm cable gland. Output signal: V AC. Output/input ratio : 1 mV / A AC. Output via Ø4mm insulated female sockets.
MN15 AC current clamp
P01120417
Current clamp 200A AC. Ø20mm insert. Output signal: V AC. Output/input ratio: 1 mV / A AC. Output via cord and Ø4mm insulated male plugs.
MN21 AC current clamp
P01120418
Current clamp 200A AC. Ø20mm cable gland. Output signal : A AC. Transformer ratio : 1000/1. Output via cord and Ø4mm insulated male plugs. Output protected against overvoltage.
MN23 AC current clamp
P01120419
Current clamp 200A AC. Ø20mm cable gland. Output signal: V AC. Output/input ratio: 10 mV / A AC. Output by cord and Ø4mm insulated male plugs.
MN71 AC current clamp
P01120420
Current clamp 10A AC. Ø20mm cable gland. Output signal: AC voltage. Output/input ratio: 100 mV/A AC. Output via cord and Ø4mm insulated male plugs, for measurement on the secondary side of the I.T.
MN73 AC leakage current clamp
P01120421
200A AC current clamp for leakage current testing. Ø20mm insert. Output signal: V AC. S/E ratio: 1000 mV-10 mV/A AC. Output via cord and Ø4mm insulated male plugs.
MN73A AC leakage current clamp
P01120439
2A / 200A dual-calibre clamp ammeter with 4-pin connector for MX535 and CA 6133 low-voltage installation controllers
- 1
- 2
Add one or more products to your quote request in just a few clicks. Our teams will analyze your needs and get back to you quickly with a personalized offer tailored to your requirements.
Similar products
